Whirlpool W11440958 Technical Manual page 35

5. Remove the two T20 screws from the terminal block to get
access to the interference filter screws (see Figure 3).
6. Remove the two (2) T20 screws securing the interference
filter to the back panel (see Figure 4).
7. Remove the interference filter from it's bracket by using a
Torx T-20 driver to remove the two screws. (see Figure 5).
Figure 3
Figure 4
Figure 5
COMPONENT ACCESS (Cont.)
8. Slide the filter horizontally away from the bracket to release
the plastic tabs (see Figure 6).
Figure 6
Whirlpool 24" Compact Condensing Dryer
®
4-7
n