Features; After Unpacking; Specifications - Coinco 800 Series Operation And Service Manual

SECTION 1: GENERAL INFORMATION

Features

· The COINCO GLOBAL 2
a modular design for easy service.
· Tubes snap in and out of housing for easy
customization of your changer
· Pays out change from self-loading, high
capacity change tubes
· Two motors provide fast, accurate payout.
· Programmable tube floats allow variable
tube level adjustment.
· State-of-the-art electronic logic system is
designed for reliability and performance.
· Lightweight, rugged plastic construction.
· All models equipped with the MDB proto-
col.
· Lockable coin loading door allows easy
hand-loading of coin tubes while keeping
dirt and debris out of the changer.
· The Protocol 'A' (Executive) changer has
the ability to be an MDB master to a either
Bill validator or cashless system.

After Unpacking

After unpacking the unit, inspect it for any
possible shipping damage. If the unit is dam-
aged, notify the shipping company immediately.
Only the consignee (the person or company
receiving the unit) can file a claim against the
carrier for shipping damage. We recommend
that you keep the original shipping carton and
packing materials to reuse if you need to trans-
port or ship your changer in the future.
If the coin changer is being stored or used as a
spare, always keep it in its shipping carton
when not in use. This will keep it clean and
offer the best protection for the unit.
Page 4

Specifications

® coin changer has
Power Requirements (by model)
MDB .................................................... 34V DC
Single/Four Price .................24V AC, 50/60 Hz
Protocol A............................24V AC, 50/60 Hz
L/L+ ..................................................... 24V DC
BDV..................................................... 24V DC
Operating Temperature Non-Metric/Metric
0 to 150 Degrees Fahrenheit
-18 to 65 Degrees Celsius
Storage Temperature Non-Metric/Metric
-22 to 160 Degrees Fahrenheit
-30 to 72 Degrees Celsius
Relative Humidity
20% to 98% Noncondensing
Operating Attitude
Vertical
Physical Dimensions Metric/Non-Metric
Height:
Width: 138.9mm (5.47 inches)
Depth:
Weight in Shipping Carton Non-Metric/Metric
Approximately 7 pounds
Approximately 3.15 kilograms
Coin Size Range
Up to 32 coins or tokens in the size range of
15.0 to 33.5 mm diameter and 1.02 to 3.10 mm
thickness can be validated.
120V AC, 50/60 Hz
220V-240V AC, 50/60 Hz
+ 3 degrees
BASE T O TOP OF COIN RETURN LEVER
379.2mm (14.93 inches)
GATE OPEN
82.5mm (3.25 inches)
GATE CLOSED
76.2mm (3.00 inches)
800 Series