Page 2
Changer Components Changer Components Changer Components Escrow Lever Acceptor Gate LCD Display User Interface Acceptor Keypad Release Latch Acceptor Docking Sorting Door Cradle Coin Sorting Door Denomination Latch Markings External Payout Data Port Cassette Release Latch Graduated Tube Scales Swing-out Payout Cassette Access...
Page 3
Navigation Up/Down Arrows: Shows Right Arrow: Move across options are available screen or selects current item. above & below “Audit”. Upper Level Menu: ▲ MAIN MENU Current Menu: Lower Audit ▼ case for this menu. Up Arrow: Scroll up in current menu. Left Arrow: Go back one menu level.
Menu Layout Main Menu Audit Audit Current Historical Clear Current Setup Setup Float Cassette Coin Config Field Tune General Password Recommendations Optimal Float Recommendations Service...
Page 5
Setup Menu Layout Setup Menu Setup Menu Set Float Float Disable Float Overfill Paydn Float Paydn Cassette Standard Custom Coin Config Coin Enable Change Mgmt Security Level Field Tune Token Add Token Delete Token Chg Value Token Chg Rtg Slug Remove General Autotest MDB Settings...
Steady State Display Messages During steady state operation, the display will show one of four typical screens as shown in the fi gure below. Fully Functional Changer Problem Fully Functional Changer Problem Float Enabled Warning Float Enabled Option 3: Warning Option 1: Option 3: Option 1...
Page 7
3. Fill the six coin tubes with the appropriate coins. 4. Close the Payout Cassette. Notes • Make sure all coins lay fl at and fi ll each coin tube to be used with at least 5 coins. • For the most reliable operation, do not load coin tubes above the 100% level marking.
2. Open Payout Cassette and Sorting Door. Autotest begins automatically. All systems are cycled and the status of each is reported on the display. For more information on the Guardian 6000™, please see the Operation and Service Manual, available at www.coinco.com...