Section 1: General Information Introduction; For Your Records - Coinco 800 Series Operation And Service Manual

SECTION 1: GENERAL INFORMATION
Introduction
This manual contains information on installing,
operating and maintaining your COINCO
GLOBAL2 ® coin changer. The manual is
intended for owners, route operators and shop-
level technicians as a primary source of
information. Taking time to read this manual
and becoming familiar with this information
will help you obtain the best performance from
your COINCO GLOBAL2
The COINCO GLOBAL2
Acceptors can accept and validate up to 32
different coins or tokens. The COINCO
GLOBAL2 ® Changer has the ability to be dual
currency using a built in exchange rate
convertor. It is programmable through a digital
display making it easy to set up a user
configuration. The COINCO GLOBAL2
Changer is compatible with current vending
machine protocol standards as follows:
• MDB: For electronic vending machines that
utilizes COINCO's Multi-Drop Bus
technology.
Note: All Global changers are equipped
with the MDB interface as standard.
• Single-Price/Four-Price: For
electromechanical vending machines.
• Protocol 'A' (Executive): For vending
machines equipped with an electronic
Protocol 'A' serial interface.
• Protocol 'A' (Executive) with MDB Master:
As above with the additional ability to
interface to MDB Bill validator or MDB
Cashless devices whilst being connected to a
vending machine in protocol 'A' mode.
• BDV: For vending machines equipped with
an electronic BDV serial interface.
800 Series
®
changer.
® Changer from Coin
®

For Your Records

A label indicating the coin changer model
number and serial number can be found on the
side of the coin changer. Refer to the model and
serial number whenever you call upon your
Coinco Service Centre for information or
service. For your information, the first four
digits of the serial number indicates when the
unit was built which is also the beginning of the
warranty period. The first two digits indicate the
week of manufacture; the third and fourth digits
indicate the year of manufacture. For example,
Serial Number 1503005895 would indicate that
the unit was manufactured in the 15th week of
2003.
The changer model number is shown in the
following format:
AAA–BXXXZ
Where:
AAA The country/currency code. E.g. SEK =
Swedish Krone, GBP = Great Britain
Pound.
B
The primary protocol of the changer
G = MDB only
F = Four/Single-price Electromechanical
A = Protocol 'A' (Executive)
B = BDV
(Note: All models have MDB in addition
to the primary protocol)
XXX
The first digit of the model number
indicates the series of the changer 7, 8 or
9. The last two digits indicates the
changers payout configuration.
Z
Indicates any special options.
Page 3