Setting The Vend Price On A Protocol A Changer; Setting The Cashless Vend Price On A Protocol A Changer - Coinco 800 Series Operation And Service Manual

SECTION 3: CONFIGURATION
Setting The Vend Price On
A Protocol A Changer
The vend price on a Protocol A changer may be
set in three ways:
• via Coinco Support Software;
• via DEX/UCS;
• via the digital display
SETTING THE STANDARD PRICELINES
If the vending machine operates in Price Hold-
ing Mode, then the twenty-five prices are set
using Addresses C101-C125 accordingly.
1. Enter the Display Mode (see "Display
Mode" section of this manual).
2. Press B to scroll up to Address C101 (For
Priceline 1)
3. Press C to enter. The current price setting is
displayed.
4. Use buttons B (increase) and D (decrease) to
change the value to the desired price.
5. Press A to store price and return to the
Display Mode.
6. Press B to increase to the next priceline -
E.g. Address C102 (Priceline 2)
7. Repeat steps 3-6 for the remaining priceline
addresses.
8. Once all twenty-five prices have been set,
press A to exit the Display Mode.
SETTING THE NUMBER OF ACTIVE
PRICELINES (C055)
If the vending machine operates in Price Hold-
ing Mode then the number of price lines avail-
able that are recorded in audit can be set using
address C055.
1. Enter the Display Mode (see "Display
Mode" section of this manual).
2. Press B to scroll up to C055.
3. Press C to enter Address C055.
4. Use buttons B (increase) and D (decrease) to
change the number of price lines in Address
C055.
800 Series
5. Press A to store the value and return to the
Display Mode.
6. Press A to exit the Display Mode.
ENABLING CASHLESS PRICELINES
(C053)
If the vending machine operates in Price Hold-
ing Mode, address C053 is used to enable the
Cashless pricelines C201 to C225.
1. Enter the Display Mode (see "Display
Mode" section of this manual).
2. Press B to scroll up to Address C053.
3. Press C to enter C053.
4. Use buttons B (increase) or D (decrease) to
change the value.
0 = Enable price lines
1 = Disable price lines
5. Press A to store the value and return to the
Display Mode.
6. Press A to exit the Display Mode
SETTING THE CASHLESS PRICELINES
If the vending machine operates in Price Hold-
ing Mode, the cashless pricelines are set using
Addresses C201-C225. When a vend is made
using credit from an MDB Cashless device the
prices stored in these addresses will be used.
Cash vends will still use the prices stored in
addresses C101 to C125.
1. Enter the Display Mode (see "Display
Mode" section of this manual).
2. Press B to scroll up to C201.
3. Press C to enter Address C201.
4. Use buttons B (increase) and D (decrease) to
change the value to the desired price.
5. Press A to store the price and return to the
Display Mode.
6. Press B to increase to the next priceline -
E.g. Address C202 (Cashless priceline 2).
7. Repeat steps 3-6 for the remaining
pricelines.
8. Once all twenty-five prices have been set,
press A to exit the Display Mode.
Page 13