Table of Contents
Advertisement
User Manual
GFK-1503F
4.6
Activating or Replacing the Backup Battery
The CPU module is shipped with a battery already installed. The battery holder is located in
the top side of the CPU module. Before the first use, activate the battery by pulling and
removing the insulator tab.
Figure 35
4.6.1
Lithium Battery Replacement
To replace the battery, use a small screwdriver to gently pry open the battery holder.
Replace battery only with one of the following:
Use of another battery may present a risk of fire or explosion.
CAUTION
Battery may explode if mistreated.
Do not recharge, disassemble, heat above 100 deg.C (212 deg.F) or incinerate.
Installation
Emerson
IC200ACC001
Panasonic BR2032
Chapter 4
Jan 2020
40
Advertisement
Table of Contents
