User Manual
GFK-1503F
Chapter 11:
This chapter explains the Service Request (SVCREQ) function, which requests a special
PLC service. It describes SVCREQ parameters for the VersaMax
•
SVCREQ Function Numbers
•
Format of the SVCREQ Function
•
SVCREQ 1: Change/Read Constant Sweep Timer
•
SVCREQ 2: Read Window Times
•
SVCREQ 3: Change Programmer Communications Window Mode
•
SVCREQ 4: Change System Communications Window Mode
•
SVCREQ 6: Change/Read Number of Words to Checksum
•
SVCREQ 7: Read or Change the Time-of-Day Clock
•
SVCREQ 8: Reset Watchdog Timer
•
SVCREQ 9: Read Sweep Time from Beginning of Sweep
•
SVCREQ 10: Read Folder Name
•
SVCREQ 11: Read PLC ID
•
SVCREQ 13: Shut Down (Stop) PLC
•
SVCREQ 14: Clear Fault
•
SVCREQ 15: Read Last-Logged Fault Table Entry
•
SVCREQ 16: Read Elapsed Time Clock
•
SVCREQ 18: Read I/O Override Status
•
SVCREQ 23: Read Master Checksum
•
SVCREQ 24: Reset Ethernet Daughter Board
•
SVCREQ 26/30: Interrogate I/O
11.1
SVCREQ Function Numbers
Each Service Request has its own function number, as listed in the following table.
Function #
1
2
3
4
5
6
7
8
The Service Request Function
The Service Request Function
Description
Change/Read Constant Sweep Timer
Read Window Times
Change Programmer Communications Window Mode and Time
Change System Communications Window Mode and Time
reserved
Change/Read Number of Words to Checksum
Change/Read Time-of-Day Clock
Reset Watchdog Timer
Chapter 11
Jan 2020
TM
CPU.
176