Table of Contents
Advertisement
User Manual
GFK-1503F
4. With a small flathead screwdriver, pull down on the DIN rail latch tab(s) on the
4.1.2
Panel-Mounting
For maximum resistance to mechanical vibration and shock, the equipment must also be
installed on a panel. Using the module as a template, mark the location of the module's
panel-mount hole on the panel. Drill the hole in the panel. Install the module using an M3.5
(#6) screw in the panel-mount hole.
Figure 21
Note:
1.
Tolerances on all dimensions are +/- 0.13mm +/-0.005in) non- cumulative.
2.
1.1 to 1.4Nm (10 to 12 in/lbs) of torque should be applied to M3.5 (#6-32) steel screw threaded into
material containing internal threads and having a minimum thickness of 2.4mm (0.093in).
Figure 22
Installation
bottom of the module and lift the module off the DIN rail.
Chapter 4
Jan 2020
32
Advertisement
Table of Contents
