Proxxon FET Manual page 15

Hide thumbs Also See for FET:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 15
Contents:
1.
In general
2.
Specific safety regulations for circular
saw benches
3.
4.
5.
6.
6.1.
6.2.
6.3.
6.4.
6.4.1.
7.
7.1.
7.2.
8.
9.
10.
10.1.
10.1.1.
10.1.2.
10.1.3.
10.1.4.
10.2.
10.3.
10.4.
10.4.1.
11.
11.1.
12.
12.1.
13.
13.1.
13.2.
13.3.
14.
15.
1. In general
Dear Customer!
15
The use of these instructions
15
16
• makes it easier to become acquainted with the device,
16
• prevents malfunctions due to improper handling, and
• increases the service life of your device.
16
16
Always keep these instructions close to hand.
16
Only operate this device with exact knowledge of it and com-
17
ply with the instructions.
17
PROXXON will not be liable for the safe function of the
17
device for:
17
• handling that does not comply with the usual intended
17
use,
• other application uses that are not stated in the instruc-
17
tions,
18
• disregard of the safety regulations.
18
You will not have any warranty claims for:
18
• operating errors,
18
• lack of maintenance.
18
18
For your safety, please comply with the safety regulations at
18
all costs.
Only use original PROXXON spare parts.
All rights reserved for further developments within the mean-
18
ing of technical progress. We wish you much success with
19
the device.
19
19
2. Specific safety regulations for circular
19
saw benches
19
• Do not use deformed or flawed saw blades.
19
• Replace worn bench inserts.
19
• Use only the saw blades recommended by Proxxon.
20
Utilised saw blades must comply with EN 847-1. The saw-
20
cut may not be smaller than the thickness of the splitting
wedge.
20
• Make sure the saw blade is suitable for the material to be
21
sawn.
21
• Wear hearing protection!
21
• The sawdust from certain materials can be hazardous to
your health. Therefore, wear a respirator.
21
• Wear gloves when handling saw blades and rough materi-
22
als!
22
• Only operate the saw with a dust suction device! Your saw
has a connecting piece at the back for this purpose. You
can connect a vacuum cleaner here.
• For smaller work pieces, use a push-rod for the feed!
• Never work with a device that has faulty or defective parts.
Your circular saw might no longer be safe. Therefore,
have any damage immediately repaired by the Proxxon
Customer Service!
GB
15

Advertisement

Table of Contents
loading

Table of Contents