Table 8. Components on the system board (continued)
Callout
MCIO x4 connector for NVMe
16
SATA 6
17
SATA 7
18
SATA 0 to 3
19
SGPIO1 connector
20
SATA 5
21
System-board LED
The illustration in this section shows the light-emitting diode (LED) on the system board.
Figure 9. System-board LED
Table 9. System-board LED
System error LED (amber)
1
System-board jumpers and buttons
The illustration in this section shows the location of the jumpers and buttons on the server.
Note: If there is a clear protective sticker on the top of the switch blocks, you must remove and discard it to
access the switches.
ThinkSystem ST250 V2 Setup Guide
26
Callout
Two USB 3.2 Gen 2 connectors
37
Ethernet connector 2
38
Ethernet connector 1 (shared with XCC network
39
port)
Lenovo XClarity Controller(XCC) management port
40
VGA and serial port connector
41