Safety - Weinmann VENTIsupport Description And Operating Instruction

2. Safety

You can use the VENTIadjust remote settings module to
display the following symbols in the VENTIsupport
software:
Low-priority alarm was triggered from the therapy
device
Medium-priority alarm was triggered from the therapy
device
For your own safety please observe the following
points:
• Read these operating instructions carefully. They are
part of VENTIsupport and must be kept available at
all times.
• Use VENTIsupport for the designated purpose on-
ly. Only therapy devices manufactured by Wein-
mann may be connected to the converter box.
• The system may only be used by trained persons
with adequate specialist knowledge.
Attention!
A PC and patient may not be connected simultaneous-
ly to the therapy device unless there is a sufficient gal-
vanic separation. This is only ensured by using the
converter box with galvanic separation WM 93316.
Attention!
The VENTIadjust remote settings module is not an on-
line monitoring system. Do not use the remote settings
module to monitor the alarms or the therapy pressure.
3