Troubleshooting - ABB Robotics IRC5 Safety Manual

8 Troubleshooting

General
When troubleshooting requires work with power switched on, special considerations
must be taken:
A risk assessment must be done to address both robot and robot system specific
hazards.
A robot may perform unexpected limited movement.
Related information
See also the safety information related to installation, operation, maintenance, and
repair.
Safety manual for robot - Manipulator and IRC5 or OmniCore controller
3HAC031045-001 Revision: R
• Safety circuits might be muted or disconnected.
• Electrical parts must be considered as live.
• The manipulator can move unexpectedly at any time.
DANGER
Troubleshooting on the controller while powered on must be performed by
personnel trained by ABB or by ABB field engineers.
WARNING
Hazards due to the use of brake release devices and/or gravity beneath the
manipulator shall be considered.
WARNING
Manipulator movements can cause serious injuries on users and may damage
equipment.
© Copyright 2008-2021 ABB. All rights reserved.
8 Troubleshooting
29