Options - ADF Web HD67604-A1 User Manual

Industrial Electronic Devices
O :
PTIONS
The section "Options" is used to enable some option for each PROFIBUS device (Fig. 13).
The means of the fields are:
In the field "Enable
Sync" the PROFIBUS
Sync command is enable.
This option is enable only
if the "Sync Mode" is
supported by the device
(see Capabilities section
to check it);
In the field "Enable
Freeze" the PROFIBUS
Freeze command
enable. This option
enable only if the "Freeze
Mode" is supported by
the device (see
Capabilities section
check it);
In the field "Reset data
if PROFIBUS master
loses communication
from the slave"
possible to select
cancel the data of the
slave if the Master lost
the connection with the
device;
In the field "Reset data
if PROFINET master
doesn't poll the slave
in ... milliseconds" is possible to select to cancel the data sended to the slave PROFIBUS if the Converter don't receive a PROFINET
frame within the time expressed in the field.
ADFweb.com Srl – IT31010 – Mareno – Treviso
is
is
to
is
to
Figure 13: "PROFIBUS Device – Options" window
User Manual PROFINET / PROFIBUS Master - Converter
Document code: MN67604_ENG Revision 1.001 Page 24 of 33