ADF Web HD67604-A1 User Manual page 21

Industrial Electronic Devices
By pressing the "Modify User Parameters
window appears (Fig. 10).
In this window is possible to add/modify the User and/or Modules Parameters manually, i.e. writing the configuration of the parameters (in
hexadecimal).
The means of the fields are:
In the field "Insert the number of User
of byte for the parameter have to be inserted;
In the field "Insert the Configuration of Module
configuration of the User and/or Modules Parameters is defined.
The configuration must be write in hexadecimal mode (without
prefix "0x" o "$").
Note:
The Values inserted in the table must between 00 and FF
ADFweb.com Srl – IT31010 – Mareno – Treviso
User Manual PROFINET / PROFIBUS Master - Converter
Manually" button from the "PROFIBUS Device" window (Fig. 6) the "Add Module Manually"
Parameter" the number
(HEX)" the
Document code: MN67604_ENG
Figure 10: "Add/Modify User Parameters Manually" window
Revision 1.001 Page 21 of 33