ADF Web HD67604-A1 User Manual page 19

Industrial Electronic Devices
By pressing the "Manual Module" button from the "PROFIBUS Device" window (Fig. 6) the "Add Module Manually" window appears (Fig. 8).
In this window is possible to add a Module manually, i.e. writing the configuration of the module (in hexadecimal).
The means of the fields are:
In the field "Description of
In the field "Insert the Configuration of Module
configuration of the module is defined. The configuration must be write
in hexadecimal mode (without prefix "0x" o "$").
To modify a Module inserted manually, is neccessary to do a double click on
the module to change in the "Select Module" list
possible to change only the module inserted manually.
Note:
The Values inserted in the table must between 00 and FF
ADFweb.com Srl – IT31010 – Mareno – Treviso
Module" a name of the Module is defined;
(Fig. 7, point (1)). It is
User Manual PROFINET / PROFIBUS Master - Converter
Document code: MN67604_ENG
(HEX)" the
Figure 8: "Add/Modify Module Manually" window
Revision 1.001 Page 19 of 33