3.6. SendToCOM
The SendToCOM uses the serial port to communicate with expansion module. To use the
SendToCOM, you can send data to expansion module through the serial port, and receive data
from other device through the serial port.
For more information about these commands for communicating with expansion module, please
refer to:
CD:\WinPAC\napdos\io_module\87k_high_profile_modules.htm
WP-8000-CE7 Series User Manual, version 1.0.2
Page: 55
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com