ICP DAS USA WP-8000-CE7 Series User Manual page 158

F.5.1. WinPAC acts as a Master (default)
When one of WinPAC is set to master, then all the other devices on the same network must be
slave mode. If the network is up to 1.2 KM, it will need a repeater (7510 series) to extend the
network length.
Master
Slave
WP-8000-CE7 Series User Manual, version 1.0.2
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.com
(I-7510 Series)
RS-485 Repeater
Slave
(I-7510 Series)
RS-485 Repeater
Slave
Page: 158
Slave