Summary of Contents for ICP DAS USA WP-5231PM-3GWA-CE7
Page 1
Screw * 4 2.4 mm and a micro SD/SD adapter Technical Support WP-5000-CE7 User Manual CD:\WinPAC_AM335x\Wp-5231\Document\ http://ftp.icpdas.com/pub/cd/winpac_am335x/wp-5231/document/ Configuring the Boot Mode Before starting any installation, be sure that the switch is placed in the “0” position. WP-5231PM-3GWA-CE7 Quick Start, E-mail: service@icpdas.com...
Page 2
Connect PC to the Ethernet port through an Ethernet switch. iii. Connect the power supply (+12 to +48 V ) to PWR and GND terminals. iv. Connect the monitor to the VGA port. v. Turn on the WinPAC WP-5231PM-3GWA-CE7 Quick Start, E-mail: service@icpdas.com...
Page 3
Using PAC Utility to Manage the WinPAC Step 1: Double-click the PAC Utility shortcut on the desktop Step 2: Configure IP address (DHCP), FTP Server, Auto Execution files…, etc Step 3: Reboot the WinPAC for changes to take effect WP-5231PM-3GWA-CE7 Quick Start, E-mail: service@icpdas.com...
Page 4
Regional Settings Step 2: Click User Interface Language tab, choose to your local language, and then click OK Step 3: Run the PAC Utility, and then reboot the WinPAC for changes to take effect WP-5231PM-3GWA-CE7 Quick Start, E-mail: service@icpdas.com...