Tools And Tasks - ICP DAS USA WP-8000-CE7 Series User Manual

3. Tools and Tasks

This chapter provides a brief introduction of the WP-8000-CE7 service tools and its benefits.
There are several tools and utilities built-in and designed for use with WP-8000-CE7. Some of these
are pre-installed on WP-8000-CE7 and can work directly on WP-8000-CE7, and some of these are
supporting tools and can help you to manage the WP-8000-CE7 remotely on a PC.
The following tools are pre-installed on WP-8000-CE7 and can work directly on WP-8000-CE7 that
can be found on the CD that was provided with the package or by downloading the latest version
from ICP DAS web site.
CD:\WinPAC_AM335x\wp-8x2x\System_Disk\Tools\
http://ftp.icpdas.com/pub/cd/winpac_am335x/wp-8x2x/system_disk/tools/
DCON_Utility_Pro
modbus_master_tool
PAC_Utility
Remote_Display
SendToCOM
WP-8000-CE7 Series User Manual, version 1.0.2
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.com
ISQLW35
Notepad
RegEdit
TaskMgr
VCEP
Page: 36