Mounting The Wp-8000-Ce7 - ICP DAS USA WP-8000-CE7 Series User Manual

2.1. Mounting the WP-8000-CE7

The WP-8000-CE7 can be mounted either directly to a wall/panel, or onto a standard 35mm DIN
rail.
Wall/Panel mounting
Step 1: Install the four mounting
screws into the 4 keyhole
mounting holes
Step 2: Fasten the screws securely
Tips & Warnings
There must be a minimum clearance of 50mm between the WP-8000-CE7
and the top and bottom side of the enclosure panel.
WP-8000-CE7 Series User Manual, version 1.0.2
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.com
Page: 21