ICP DAS USA WP-8000-CE7 Series User Manual page 29

Safe Mode
Safe mode is a troubleshooting mode. The mode loads the minimum required device
drivers and system services to boot the WP-8000-CE7.
If you have malicious software or a program caused the WP-8000-CE7 cannot be boot
or run the normal mode, you can boot in safe mode to solve the problem.
Debug Mode
Debug mode is a special environment in which program debug functions can be used
in addition to normal system functions.
Debug mode is unsupported.
OS Update Mode
OS update mode is a way used to update OS. For more information on updating the
WP-8000-CE7 OS image, please refer to section 7.1. OS updates
Reserve → OS Development Mode
The positions 4, 6, of rotary switch are reserved for OS development.
User Mode
The positions 7, 8, 9 of rotary switch are reserved for user's applications.
When WP-8000-CE7 is boot with one of these positions, it is boot at normal mode.
User's application can check the position of the rotary switch position to run at
different mode.
WP-8000-CE7 Series User Manual, version 1.0.2
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved.  E-mail: service@icpdas.com
Page: 29