Bartec SYSCOM ROCK User Manual page 31

If applicable, handle the mains lead and socket as follows in order to avoid any risk of fire, electrical
shock or damage and/or injuries:
- Insert the plug fully into the mains socket.
- Operate the product on an appropriate supply.
- When wiring cables, be sure to unplug the mains lead for your safety and take care not to catch your
feet on the cables.
- Disconnect the mains lead from the mains socket before working on or moving the product.
- Keep the mains lead away from heat sources.
- Unplug the mains plug and clean it regularly. If the plug is covered with dust and it picks up moisture,
its insulation may deteriorate, which could result in a fire.
Note
- Do not use the supplied mains lead on any other equipment.
- Do not pinch, bend or twist the mains lead excessively. The core conductors may be damaged,
exposed or broken.
- Do not modify the mains lead.
- Do not put anything heavy on the mains lead.
- Do not pull on the mains lead itself when disconnecting the mains lead.
- Do not connect too many appliances to the same mains socket.
- Do not use a poor fitting mains socket.
Prohibited Usage
Do not install the product in locations, environments or situations such as those listed below or the
product may malfunction and cause a fire, electrical shock, damage and/or injuries.
Location
- Do not place the product under water.
- Avoid moving the product from a cold area to a warm area. Sudden surrounding temperature changes
may cause moisture condensation. This may cause the product to show malfunctions.
Environment
- Do not place the product in a room with oily smoke or steam. Fire, electric shock or warping may result.
- Do not heat the case of a product with an internal battery above 50°C. Such condition may damage
the internal battery.
Situation
- Do not use the product when your hands are wet, with the cover removed or with attachments not
recommended by the manufacturer.
- Disconnect the product from mains socket during lightning storms.
- Do not install the product so that it impair travelling along usual paths. Injury or damage to a person or
object bumping into the product may result.
Broken pieces
- Do not throw anything at the product. The impact may break an antenna, the keyboard or a connector.
Description
This product is a vibration monitoring instrument. It is equipped with a 4G LTE interface.
The 4G LTE interface is mainly intended for data transfer.
This product uses internationally harmonized frequencies.
This product may be used in a domestic or industrial environment.
31 / 34 www.bartec-syscom.com
Copyright © Bartec Syscom 2019