Cs240Dm And Device Configuration Utility - Campbell CS240 Product Manual

Table 8-2: Holding register map
Holding register
40001
40002
40003
40004
40005
1 Unsigned short data is a 16-bit positive integer.
8.4 CS240DM and Device Configuration
Utility
Device Configuration Utility i s bundled in Campbell Scientific data logger support software and
can also be acquired, at no cost, from www.campbellsci.eu/downloads.
Utility can be used to change the CS240DM settings, view stored values, and update the
CS240DM operating system (OS). It also provides wiring information.
To use Device Configuration Utility, the CS240DM must be connected to a computer and 12 VDC
power source. A USB-to-RS-485 adapter is required to connect the CS240DM to the computer.
The following is the procedure for connecting to Device Configuration Utility:
1. Open the Device Configuration Utility.
2. Under Device Type, click CS240DM.
CS240 and CS240DM PT-1000 Class A, Back-of-Module Temperature
Value
Unsigned short
Modbus address
Unsigned short
Baud rate
Unsigned short
Parity
Unsigned short
Stop bit
Termination
Unsigned short
resistor
Modbus
data type
1
Modbus device address (1 to 247)
1 = 9600 bps
2 = 19200 bps
1
3 = 38400 bps
4 =57600 bps
5 = 115200 bps
0 = no parity
1
1 = odd
2 = even
1 = 1 stop bit
1
2 = 2 stop bits
0 = off/disable
1
1 = on/enable
Description
Device Configuration
Sensors 19