Campbell CS240 Product Manual page 10

6. In Output Setup, type the scan rate, a meaningful table name, and the Data Output Storage
Interval.
7. Select the measurement and its associated output option.
8. Click Finish and save the program. Send the program just created to the data logger if the
data logger is connected to the computer.
9. If the sensor is connected to the data logger, check the output of the sensor in the data
logger support software data display in LoggerNet, RTDAQ, or PC400 to make sure it is
making reasonable measurements.
CS240 and CS240DM PT-1000 Class A, Back-of-Module Temperature Sensors 4