Keysight X Series Installation Note page 8

Agile signal generators

Hide thumbs Also See for X Series:

1CC145A - Empty Drive Tray Accessory Installation

5. Refer to

Figure

3. Install the SSD onto the tray using the same screws. Torque to 4 in-lbs.

Figure 3

SSD Installation

6. Install the drive tray by sliding the tray into the rear panel opening. Press to mate with the

connectors. Secure by tightening the thumb screw. Torque to 9 in-lbs.

7. Connect the power cord and turn the instrument on. There should be no errors.

Installation Note N5191-90025