Keysight X Series Installation Note page 3

Add SSD Accessories 1CC145A and 1CC150A
1CC145 - Empty Drive Tray accessory
1CC150A - Additional Solid-State Drive
Product Affected: . . . . . . . . . . . . . . . . . . . . . . . . .
Serial Numbers: . . . . . . . . . . . . . . . . . . . . . . . . . .
Options: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To Be Performed By: . . . . . . . . . . . . . . . . . . . . . .
Estimated Installation Time: . . . . . . . . . . . . . . .
Estimated Verification Time: . . . . . . . . . . . . . . .
Introduction
These accessory kits add an empty drive tray or an additional solid-state drive to the UXG X-Series
Agile Signal Generators.
Installation includes the following major steps:
1CC145A - Empty Drive Tray accessory -
1. Check signal generator functionality.
2. If you are installing the empty drive:
— Remove the current SSD
— Install the empty drive tray from kit N5191-60215
3. If you are installing your own SSD:
— Remove the current SSD
— Remove the plate from the empty drive tray
— Secure SSD onto the drive tray
— Install the SSD tray
1CC150A - Additional Solid-State Drive -
1. Check signal generator functionality.
2. Remove the current SSD
3. Install the Keysight SSD
Installation Note N5191-90025
Add SSD Accessories 1CC145A and 1CC150A
N5191A, N5192A, N5193A, and N5194A
All
(X) Keysight Technologies Service Center
(X) Personnel Qualified by Keysight Technologies
(X) Customer
0.5 hours
0.5 hours
Page 6
Page 9
3