Chapter 5 Display And Setting Of Various Functions; List Of Functions - SMC Networks HRLE Series Operation Manual

Chapter 5 Display and Setting of Various
Carefully read and understand this manual before changing the
settings.

5.1 List of Functions

No. Function
1 Main menu
2 Alarm menu
3 Monitor menu
4 Setting menu
Alarm setting menu
5
Communication setting
6
menu
Electric conductivity
7
1
control menu *
*1：Displayed only when the Electric conductivity control function is enabled.Please use the optional accessory HRL-DI001.
HRLE Series
Functions
The product can have the displays and settings shown in "Table 5-1 List of
Functions".
Table 5-1 List of Functions
Displays the current temperature and set temperature of the
circulating fluid, discharge pressure of the circulating fluid, and
Electric conductivity of the circulating fluid. It also allows the
circulating fluid temperature to be changed.
Displays the alarm number when an alarm is generated.
Displays the current alarm only.
As part of the daily check, temperature, pressure, Electric
conductivity, and accumulated operating time can be checked. Use
this menu for your daily check.
Key-lock, key operation sound,upper limit of fan output control, with
or without Electric conductivity control function
signal, anti-freezing operation, etc. can be set.
Various settings and the accumulated operating time of the
dust-proof filter can be reset.
Depending on the alarm type, FLT (operation stops) and WRN
(operation continues) can be switched and alarm settings can be
changed.
Enables/disables contact input / output.
This function controls the electrical conductivity of the circulating
fluid flowing through the DI filter by a solenoid valve by setting the
set value of the circulating fluid electrical conductivity and the
hysteresis.

Chapter 5 Display and Setting of Various Functions

Outline
*1
, TEMP READY
HRX-OM-Z002
Reference
page
Chapter 5.3
Chapter 5.4
Chapter 5.5
Chapter 5.6
Chapter 5.7
Chapter 5.8
Chapter 5.9
5.1 List of Functions
5-1