Alarm Setting Menu; Alarm Sound Setting - SMC Networks HRLE Series Operation Manual

5.7 Alarm Setting Menu

5.7.1 Alarm setting menu
"Setting Menu" screen

Alarm Sound Setting

Discharge pressure rise alarm switching
Threshold for discharge pressure rise alarm setting
Discharge pressure drop alarm switching
Threshold for discharge pressure drop alarm setting
5.7.2 Alarm sound setting
HRLE Series
For some alarms, operation when an alarm is generated and alarm
thresholds can be changed.
When the "MENU" key is pressed and held (2 seconds) while the "Setting
Menu" screen is displayed, the screen is changed to the "Alarm Setting
Menu".
[MENU] key
Press and hold
(2 seconds)
The table below explains the items in the alarm setting menu. In the menu,
you can go to the next item by pressing the [SEL] key.
Press the [MENU] key once to return to the Main Menu.
Table 5-7 Alarm setting menu items
Item
This sets whether a warning sound is made or not when an alarm is
generated.
The initial value is "ON: Alarm sound enabled".
OFF: Alarm sound disabled / ON: Alarm sound enabled
Make a selection with the [▲] [▼] keys and press the [SEL]
key to apply the setting.
Chapter 5 Display and Setting of Various Functions
"Alarm Setting Menu" screen
Lit light Display
PRS
PRS
HRX-OM-Z002
Reference
page
Chapter 5.7.2
Chapter 5.7.3
Chapter 5.7.4
Chapter 5.7.5
Chapter 5.7.6
5.7 Alarm Setting Menu
5-15