Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
3 Row Coil Tine and Reel Harrow
Installation
See Figures 2-19
through
Harrow placement dimensions.
1. Attach the tine/reel arm assemblies to the rear tube
of the center and wing frames using harrow mounting
plates, 3/4 x 5-1/2 bolts, clamp bushings and 3/4 lock
nuts
See Figures
3-20. Clamp bushings are installed
on the top mounting bolts.
3-28
2-30
for 3 Row Coil Tine
2. Attach the harrow tine assemblies in correct location
with 5/8 u-bolts and 5/8 flange lock nuts.
3. Attach reel assemblies to the reel arm assemblies
using 5/8 x 3-11/16 x 4-5/8 u-bolts and 5/8 lock nuts.
4. Refer to the "3 Row Coil Tine & Reel Adjustments" in
Operation and Maintenance section for coil tine
adjustments
(See Figure
4-15).
F-1105-1120
Advertisement
Table of Contents
