Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
5 Row Spike Harrow Installation
See Figures 2-15
through
placement dimensions.
1. Attach 5 row spike harrow arm assemblies, harrow
arm clamp plate and spike harrow arm clamp to rear
frame using 3/4-10 x 9 hex bolts and 3/4 lock nuts
See Figure
3-21.
NOTE
Location of bar clamps with tabs, and position
harrow arm assemblies in the correct locations.
2. Attach pull chain bracket to spike harrow arm clamp
using 3/4-10 x 5 hex bolts and 3/4 lock nuts.
3. Refer to Note: spike bar alignment
for proper alignment of spike bar assemblies. Be sure
they are aligned properly on both right and left side of
each section.
3-30
2-20
for 5 Row Spike Harrow
See Figure 3-21
4. Attach spike bars to 5 row spike harrow arm
assemblies per placement drawings using bar clamp
plates, spike bar clamp plates, harrow bar mounts,
1/2-13 x 3 hex head cap screws, or harrow bar
mounts w/ tabs, 1/2-13 x 1-1/4 hex bolts, and 1/2 lock
nuts.
5. Refer to the "5 Row Spike Harrow Adjustments" in
Operation and Maintenance section for spike bar
alignment
See Figures
NOTE
See Figures 2-15
through
placement dimensions of spike harrow arms, harrow bar
mounts, and usage of bar clamps or harrow bar mounts
w/ tabs.
4-14.
2-20
for 5 Row Spike Harrow
F-1105-1120
Advertisement
Table of Contents
