Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Landoll Manuals
  4. Farm Equipment
  5. 9650
  6. Operator's manual

Landoll 9650 Operator's Manual

Field cultivator
Hide thumbs Also See for 9650:

Advertisement

Quick Links

Download this manual
'
Model 9650
Field Cultivator
Operator's Manual
LANDOLL COMPANY, LLC
1900 North Street
Marysville, Kansas 66508
(785) 562-5381
800-428-5655 ~ WWW.LANDOLL.COM
F-605-1022

Advertisement

loading
Need help?

Need help?

Do you have a question about the 9650 and is the answer not in the manual?

Questions and answers

Related Manuals for Landoll 9650

Summary of Contents for Landoll 9650

  • Page 1 ‘ Model 9650 Field Cultivator Operator’s Manual LANDOLL COMPANY, LLC 1900 North Street Marysville, Kansas 66508 (785) 562-5381 800-428-5655 ~ WWW.LANDOLL.COM F-605-1022...
  • Page 2 The identification plate, which lists the model number and serial number, is located on the front of the frame. SERIAL NUMBER The serial number is located on the identification plate. The Following information will help decode the 9650 FC serial number 96H2220000 = xxmyysssss QR CODE DECAL...
  • Page 3 DANGER DO NOT operate or perform any maintenance tasks on this equipment until you have completed the following: 1. Receive proper training to operate this equipment safely. 2. Read and understand the operator’s manual. 3. Be thoroughly trained on inspection and repair procedures. Failure to comply with this warning may result in serious injury or possibly death.
  • Page 5 Table of Contents Introduction and Safety Information Understanding Safety Statements ....... . 1-2 Decal Safety .
  • Page 6 TABLE OF CONTENTS Leveling (Side to Side) ......... 4-8 Gauge Wheels .
  • Page 7 Introduction and Safety Information The Landoll Model 9650 Field Cultivator is a quality product designed to give years of trouble free performance. By following each section of this manual, your system will perform as designed for you and your operation.
  • Page 8 5. Use a locking-style hitch pin that properly fits the The safety statements contained in this manual relate to tractor draw bar and the implement hitch. Lock the the operation of the Model 9650 Field Cultivator. tractor draw bar in the center position to prevent loss of steering control.
  • Page 9 TABLE OF CONTENTS High Pressure Fluid Safety 6. Attach the safety chain to the tractor recommended draw bar support. Provide only enough slack in the 1. Escaping fluid under pressure can be nearly invisible chain for turning. Do not attach the safety chain to an and have enough force to penetrate the skin causing intermediate support.
  • Page 10 TABLE OF CONTENTS Tire Safety Safety Chain 1. Tire changing can be dangerous and should be 1. Use a chain with a strength rating equal to or greater performed by trained personnel using correct tools than the gross weight of towed machinery, which is and equipment.
  • Page 11 Safety Decals and Reflectors New safety signs may be ordered from your Landoll dealer. Refer to this section for parts and proper safety The 9650 Field Cultivator is equipped with all safety signs sign placement. installed for safe operation. To Install new safety signs: For you safety: 1.
  • Page 12 TABLE OF CONTENTS P/N 144193 SIS 20MPH Front of center frame, middle QTY. 1 P/N 2-573-010037 Danger: Folding wing Front side, front hinge plate, center frame, both sides QTY. 2 P/N 2-573-010037 Danger: Folding wing Back side, rear hinge plate, center frame, both sides QTY.
  • Page 13 TABLE OF CONTENTS P/N 528934 Yellow Reflector Left front, center frame, both sides QTY. 2 P/N 528934 Yellow Reflector Left front, amber light bracket, both sides QTY. 2 P/N 528934 Yellow Reflector Left rear, center lift plate, both sides QTY. 2 P/N 528938 Orange Reflector Back side, light brackets, top, both sides...
  • Page 14 TABLE OF CONTENTS P/N 528933 Red Reflector Back side, light brackets, bottom, both sides QTY. 4 P/N 224589 SIS 20 mile/h Back side of SIS 20MPH mount plate QTY. 1 P/N 528938 SMV Emblem Back side, SMV mount plate QTY. 1 P/N 528934 Yellow Reflector Left side, rear tow hitch, both sides...
  • Page 15 Warranty Registration This manual is compiled as a guide for owners and Be certain to register the grain drill Online registration at operators of the 9650 Field Cultivator. Read it carefully so www.landoll.com within 10 days of purchase or lease, in as to be able to follow the suggestions made.
  • Page 16 1) subjected to or operated in a manner which, at any time, have exceeded the product design limits: 2) repaired or altered outside our factory in any way so as, in the judgment of Landoll Company, LLC, to affect its stability or reliability: 3) subject to misuse, negligence, accident, or has been operated in a manner expressly prohibited in the instructions;...
  • Page 17 This exclusive remedy shall not be deemed to have failed of its essential purpose so long as Landoll Company, LLC is willing and able to repair or replace defective parts in the prescribed manner.
  • Page 18 TABLE OF CONTENTS General Torque Specifications (rev. 4/97) TORQUE SPECIFIED IN FOOT POUNDS This chart provides tightening torques for general purpose applications when special torques are not specified on process or drawing. Assembly torques apply to plated nuts and cap-screws assembled without supplemental lubrication (as received condition).
  • Page 19 TABLE OF CONTENTS Hydraulic Fitting Torque Specifications TORQUE IS SPECIFIED IN FOOT POUNDS- 37 JIC, ORS, & ORB (REV. 10/97) This chart provides tightening torques for general purpose applications when special torques are not specified on process or drawing. Assembly torques apply to plated nuts and capscrews assembled without supplemental lubrication (as received condition).
  • Page 20 TABLE OF CONTENTS Model Specifications 9650 Field Cultivator Model Number 9650-38 9650-42 9650-46 9650-50 Working Width 38'-6” 42'-6” 44'-6” 50'-6” Transport Width 17'-4” 17'-4” 17'-4” 17'-4” Transport Height 11'-11” 11'-11” 13'-11” 13'-11” Number of Shanks Shanks per Section 10-15-27-15-10 14-15-27-15-14...
  • Page 21 TABLE OF CONTENTS Table provided for general use. NOTES:...
  • Page 22 TABLE OF CONTENTS Figure 2-2: Shank Placement (38’ and 42' Models) (Main Frame) F-605-1022...
  • Page 23 TABLE OF CONTENTS NOTE: RIGHT SIDE WINGS SHOWN - LEFT SIDE WINGS SHANK PLACEMENT USES SAME DIMENSIONS. 38’ 42’ Figure 2-3: Shank Placement (38’ and 42' Models) (Right Wings Shown)
  • Page 24 TABLE OF CONTENTS Figure 2-4: Shank Placement (46' and 50’ Models) (Main Frame) 2-10 F-605-1022...
  • Page 25 TABLE OF CONTENTS NOTE: RIGHT SIDE WINGS SHOWN - LEFT SIDE WINGS SHANK PLACEMENT USES SAME DIMENSIONS. 46’ 50’ Figure 2-5: Shank Placement (46’ and 50' Models) (Right Wings Shown) 2-11...
  • Page 26 TABLE OF CONTENTS 13-1/2 13-1/2 16-3/4 16-3/4 Figure 2-6: Light Bracket Placement (All Models) 2-12 F-605-1022...
  • Page 27 TABLE OF CONTENTS NOTE: RIGHT SIDE SHOWN - LEFT SIDE FRONT GAUGE WHEEL PLACEMENT USES SAME DIMENSIONS. 10-1/2 10-1/2 Figure 2-7: Front Gauge Wheel Placement 2-13...
  • Page 28 5-1/4” 14-13/16” 2-1/4” 9-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 5 TINE 8 INCH 6 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-8: 4 Row CT Harrow Placement 9650-38’ LH 2-14 F-605-1022...
  • Page 29 TABLE OF CONTENTS 20” 20” 4-1/4” 7-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 9 TINE 8 INCH HARROW ASSEMBLY Figure 2-9: 4 Row CT Harrow Placement 9650-38’ CENTER 2-15...
  • Page 30 6-1/4” 3-7/16” 11-5/8” 8-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 6 TINE 8 INCH 5 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-10: 4 Row CT Harrow Placement 9650-38’ RH 2-16 F-605-1022...
  • Page 31 TABLE OF CONTENTS Table provided for general use. NOTES: 2-17...
  • Page 32 9-1/4” 6-13/16” 5-1/4” 5-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 6 TINE 8 INCH 6 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-11: 4 Row CT Harrow Placement 9650-42’ LH 2-18 F-605-1022...
  • Page 33 TABLE OF CONTENTS 13” 13” 5-1/4” 8-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 10 TINE 8 INCH HARROW ASSEMBLY Figure 2-12: 4 Row CT Harrow Placement 9650-42’ CENTER 2-19...
  • Page 34 2-1/4” 8-7/16” 3-5/8” 12-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 6 TINE 8 INCH 6 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-1: 4 Row CT Harrow Placement 9650-42’ RH 2-20 F-605-1022...
  • Page 35 TABLE OF CONTENTS Table provided for general use. NOTES: 2-21...
  • Page 36 10-7/16” 4-1/4” 3-1/4” 5-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 6 TINE 8 INCH 7 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-13: 4 Row CT Harrow Placement 9650-46’ LH 2-22 F-605-1022...
  • Page 37 TABLE OF CONTENTS 13” 13” 5-1/4” 8-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 10 TINE 8 INCH HARROW ASSEMBLY Figure 2-14: 4 Row CT Harrow Placement 9650-46’ CENTER 2-23...
  • Page 38 2-1/4” 7-7/16” 7-1/4” 6-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 7 TINE 8 INCH 6 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-15: 4 Row CT Harrow Placement 9650-46’ RH 2-24 F-605-1022...
  • Page 39 TABLE OF CONTENTS Table provided for general use. NOTES: 2-25...
  • Page 40 9-1/4” 10-7/16” 4-1/4” 5-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 8 TINE 8 INCH 7 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-16: 4 Row CT Harrow Placement 9650-50 LH 2-26 F-605-1022...
  • Page 41 TABLE OF CONTENTS 8” 13” 13” 8” 5-7/16” 5-1/4” 8-7/16” 2-1/4” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 10 TINE 8 INCH HARROW ASSEMBLY Figure 2-17: 4 Row CT Harrow Placement 9650-50’ CENTER 2-27...
  • Page 42 2-1/4” 7-7/16” 7-1/4” 12-7/16” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 7 TINE 8 INCH 8 TINE 8 INCH HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-18: 4 Row CT Harrow Placement 9650-50’ RH 2-28 F-605-1022...
  • Page 43 TABLE OF CONTENTS Table provided for general use. NOTES: 2-29...
  • Page 44 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 4 TINE 3 ROW 6 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 60” REEL ASSEMBLY 90” REEL ASSEMBLY Figure 2-19: 3 Row Tine & Reel Placement 9650-38’ LH 2-30 F-605-1022...
  • Page 45 NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 5 TINE 3 ROW 6 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 75” REEL ASSEMBLY 75” REEL ASSEMBLY Figure 2-20: 3 Row Tine & Reel Placement 9650-38’ CENTER 2-31...
  • Page 46 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 6 TINE 3 ROW 4 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 90” REEL ASSEMBLY 60” REEL ASSEMBLY Figure 2-21: 3 Row Tine & Reel Placement 9650-38’ RH 2-32 F-605-1022...
  • Page 47 TABLE OF CONTENTS Table provided for general use. NOTES: 2-33...
  • Page 48 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 6 TINE 3 ROW 5 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 90” REEL ASSEMBLY 75” REEL ASSEMBLY Figure 2-22: 3 Row Tine & Reel Placement 9650-42’ LH 2-34 F-605-1022...
  • Page 49 NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 5 TINE 3 ROW 6 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 75” REEL ASSEMBLY 90” REEL ASSEMBLY Figure 2-23: 3 Row Tine & Reel Placement 9650-42’ CENTER 2-35...
  • Page 50 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 5 TINE 3 ROW 6 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 75” REEL ASSEMBLY 90” REEL ASSEMBLY Figure 2-24: 3 Row Tine & Reel Placement 9650-42’ RH 2-36 F-605-1022...
  • Page 51 TABLE OF CONTENTS Table provided for general use. NOTES: 2-37...
  • Page 52 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 6 TINE 3 ROW 7 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 90” REEL ASSEMBLY 105” REEL ASSEMBLY Figure 2-25: 3 Row Tine & Reel Placement 9650-46’ LH 2-38 F-605-1022...
  • Page 53 21-1/2” 13-1/2” 13-1/2” 21-5/8” NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 10 TINE 3 ROW HARROW ASSEMBLY 75” REEL ASSEMBLY 75” REEL ASSEMBLY Figure 2-26: 3 Row Tine & Reel Placement 9650-46’ CENTER 2-39...
  • Page 54 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 7 TINE 3 ROW 6 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 105” REEL ASSEMBLY 90” REEL ASSEMBLY Figure 2-27: 3 Row Tine & Reel Placement 9650-46’ RH 2-40 F-605-1022...
  • Page 55 TABLE OF CONTENTS Table provided for general use. NOTES: 2-41...
  • Page 56 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 7 TINE 3 ROW 7 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 105” REEL ASSEMBLY 105” REEL ASSEMBLY Figure 2-28: 3 Row Tine & Reel Placement 9650-50’ LH 2-42 F-605-1022...
  • Page 57 NOTE: LOCATION OF 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 5 TINE 3 ROW 6 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 75” REEL ASSEMBLY 90” REEL ASSEMBLY Figure 2-29: 3 Row Tine & Reel Placement 9650-50’ CENTER 2-43...
  • Page 58 1/2” X 4-1/2” HEX BOLTS ON FRONT GANG BARS ONLY 7 TINE 3 ROW 7 TINE 3 ROW HARROW ASSEMBLY HARROW ASSEMBLY 105” REEL ASSEMBLY 105” REEL ASSEMBLY Figure 2-30: 3 Row Tine & Reel Placement 9650-50’ RH 2-44 F-605-1022...
  • Page 59 TABLE OF CONTENTS Table provided for general use. NOTES: 2-45...
  • Page 60 10TH HOLE 9TH HOLE 11TH HOLE 8TH HOLE 12TH HOLE 7TH HOLE 13TH HOLE CATCH TRAY HOOK CATCH TRAY 8 TOOTH SPIKE 11 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-31: 5 Row Spike Harrow Placement 9650-38’ LH 2-46 F-605-1022...
  • Page 61 8TH HOLE 4TH HOLE 8TH HOLE 7TH HOLE 5TH HOLE 7TH HOLE 5TH HOLE 5TH HOLE 7TH HOLE 5TH HOLE 7TH HOLE 8 TOOTH SPIKE 9TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-32: 5 Row Spike Harrow Placement 9650-38’ CENTER 2-47...
  • Page 62 7TH HOLE 12TH HOLE 8TH HOLE 11TH HOLE 9TH HOLE 10TH HOLE 10TH HOLE CATCH TRAY CATCH TRAY HOOK 11 TOOTH SPIKE 8 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-33: 5 Row Spike Harrow Placement 9650-38’ RH 2-48 F-605-1022...
  • Page 63 TABLE OF CONTENTS Table provided for general use. NOTES: 2-49...
  • Page 64 10TH HOLE 9TH HOLE 12TH HOLE 10TH HOLE 12TH HOLE 7TH HOLE 14TH HOLE CATCH TRAY HOOK CATCH TRAY 10 TOOTH SPIKE 11 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-34: 5 Row Spike Harrow Placement 9650-42’ LH 2-50 F-605-1022...
  • Page 65 4TH HOLE 8TH HOLE 7TH HOLE 6TH HOLE 7TH HOLE 5TH HOLE 5TH HOLE 8TH HOLE 5TH HOLE 7TH HOLE 8 TOOTH SPIKE 9 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-35: 5 Row Spike Harrow Placement 9650-42’ CENTER 2-51...
  • Page 66 7TH HOLE 12TH HOLE 10TH HOLE 12TH HOLE 9TH HOLE 10TH HOLE 12TH HOLE CATCH TRAY CATCH TRAY HOOK 11 TOOTH SPIKE 10 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-36: 5 Row Spike Harrow Placement 9650-42’ RH 2-52 F-605-1022...
  • Page 67 TABLE OF CONTENTS Table provided for general use. NOTES: 2-53...
  • Page 68 6TH HOLE 8TH HOLE 11TH HOLE 6TH HOLE 13TH HOLE 4TH HOLE 13TH HOLE CATCH TRAY HOOK CATCH TRAY 11 TOOTH SPIKE 13 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-37: 5 Row Spike Harrow Placement 9650-46’ LH 2-54 F-605-1022...
  • Page 69 9TH HOLE 4TH HOLE 8TH HOLE 7TH HOLE 6TH HOLE 7TH HOLE 5TH HOLE 5TH HOLE 8TH HOLE 5TH HOLE 7TH HOLE 8 TOOTH SPIKE 9TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-38: 5 Row Spike Harrow Placement 9650-46’ CENTER 2-55...
  • Page 70 4TH HOLE 13TH HOLE 6TH HOLE 11TH HOLE 6TH HOLE 11TH HOLE 8TH HOLE CATCH TRAY CATCH TRAY HOOK 13 TOOTH SPIKE 11 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-39: 5 Row Spike Harrow Placement 9650-46’ RH 2-56 F-605-1022...
  • Page 71 TABLE OF CONTENTS Table provided for general use. NOTES: 2-57...
  • Page 72 11TH HOLE 6TH HOLE 11TH HOLE 8TH HOLE 13TH HOLE 4TH HOLE 13TH HOLE CATCH TRAY HOOK CATCH TRAY 13 TOOTH SPIKE 13 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-40: 5 Row Spike Harrow Placement 9650-50’ LH 2-58 F-605-1022...
  • Page 73 4TH HOLE 8TH HOLE 7TH HOLE 6TH HOLE 7TH HOLE 5TH HOLE 5TH HOLE 8TH HOLE 5TH HOLE 7TH HOLE 8 TOOTH SPIKE 9 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-41: 5 Row Spike Harrow Placement 9650-50’ CENTER 2-59...
  • Page 74 4TH HOLE 13TH HOLE 8TH HOLE 11TH HOLE 6TH HOLE 11TH HOLE 10TH HOLE CATCH TRAY CATCH TRAY HOOK 13 TOOTH SPIKE 13 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY Figure 2-42: 5 Row Spike Harrow Placement 9650-50’ RH 2-60 F-605-1022...
  • Page 75 TABLE OF CONTENTS Table provided for general use. NOTES: 2-61...
  • Page 76 11TH HOLE 13-7/8” 13-7/8” 11-3/4” 10” CATCH TRAY HOOK CATCH TRAY 7 TOOTH SPIKE 11 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 60” REEL ASSEMBLY 90” REEL ASSEMBLY Figure 2-43: 3 Row Spike and Reel Harrow Placement 9650-38’ LH 2-62 F-605-1022...
  • Page 77 6TH HOLE 11TH HOLE 7TH HOLE 10TH HOLE 12-7/8” 11-3/4” 12-7/8” 11-3/4” 9 TOOTH SPIKE 9 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 75” REEL ASSEMBLY 75” REEL ASSEMBLY Figure 2-44: 3 Row Spike and Reel Harrow Placement 9650-38’ CENTER 2-63...
  • Page 78 7TH HOLE 11-3/4” 10” 13-7/8” 13-7/8” CATCH TRAY CATCH TRAY HOOK 11 TOOTH SPIKE 7 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 90” REEL ASSEMBLY 60” REEL ASSEMBLY Figure 2-45: 3 Row Spike and Reel Harrow Placement 9650-38’ RH 2-64 F-605-1022...
  • Page 79 TABLE OF CONTENTS Table provided for general use. NOTES: 2-65...
  • Page 80 9TH HOLE 21-7/16” 6-5/16” 5-3/16” 18-5/16” CATCH TRAY HOOK CATCH TRAY 10 TOOTH SPIKE 10 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 90” REEL ASSEMBLY 75” REEL ASSEMBLY Figure 2-46: 3 Row Spike and Reel Harrow Placement 9650-42’ LH 2-66 F-605-1022...
  • Page 81 9TH HOLE 9TH HOLE 4H HOLE 13TH HOLE 19-3/16” 10-9/16” 6-5/16” 19-3/16” 9 TOOTH SPIKE 10 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 75” REEL ASSEMBLY 90” REEL ASSEMBLY Figure 2-47: 3 Row Spike and Reel Harrow Placement 9650-42’ CENTER 2-67...
  • Page 82 10TH HOLE 5-3/16” 18-5/16” 6-5/16” 21-7/16” CATCH TRAY CATCH TRAY HOOK 10 TOOTH SPIKE 10 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 75” REEL ASSEMBLY 90” REEL ASSEMBLY Figure 2-48: 3 Row Spike and Reel Harrow Placement 9650-42’ RH 2-68 F-605-1022...
  • Page 83 TABLE OF CONTENTS Table provided for general use. NOTES: 2-69...
  • Page 84 16-5/8” 18-3/8” 14-7/8” 13-1/2” W/O SPRING CATCH TRAY HOOK CATCH TRAY 10 TOOTH SPIKE 13 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 90” REEL ASSEMBLY 105” REEL ASSEMBLY Figure 2-49: 3 Row Spike and Reel Harrow Placement 9650-46’ LH 2-70 F-605-1022...
  • Page 85 6TH HOLE 11TH HOLE 7TH HOLE 10TH HOLE 11-3/4” 12-7/8” 12-7/8” 11-3/4” 9 TOOTH SPIKE 9 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 75” REEL ASSEMBLY 75” REEL ASSEMBLY Figure 2-50: 3 Row Spike and Reel Harrow Placement 9650-46’ CENTER 2-71...
  • Page 86 12TH HOLE 13-1/2” 14-7/8” 18-3/8” 16-5/8” CATCH TRAY CATCH TRAY HOOK 13 TOOTH SPIKE 10 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 105” REEL ASSEMBLY 90” REEL ASSEMBLY Figure 2-51: 3 Row Spike and Reel Harrow Placement 9650-46’ RH 2-72 F-605-1022...
  • Page 87 TABLE OF CONTENTS Table provided for general use. NOTES: 2-73...
  • Page 88 18-1/2” 11-3/4” 12-3/8” 5-1/8” CATCH TRAY HOOK CATCH TRAY W/O SPRING 12 TOOTH SPIKE 13 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 105” REEL ASSEMBLY 105” REEL ASSEMBLY Figure 2-52: 3 Row Spike and Reel Harrow Placement 9650-50’ LH 2-74 F-605-1022...
  • Page 89 9TH HOLE 9TH HOLE 4TH HOLE 13TH HOLE 19-3/8” 6-1/4” 10-1/2” 19-1/4” 9 TOOTH SPIKE 10 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 75” REEL ASSEMBLY 90” REEL ASSEMBLY Figure 2-53: 3 Row Spike and Reel Harrow Placement 9650-50’ CENTER 2-75...
  • Page 90 5-1/8” 12-3/8” 11-3/4” 18-1/2” CATCH TRAY CATCH TRAY HOOK W/O SPRING 13 TOOTH SPIKE 12 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 105” REEL ASSEMBLY 105” REEL ASSEMBLY Figure 2-54: 3 Row Spike and Reel Harrow Placement 9650-50’ RH 2-76 F-605-1022...
  • Page 91 TABLE OF CONTENTS Table provided for general use. NOTES: 2-77...
  • Page 92 8TH HOLE 11TH HOLE 10-7/16” 13-3/16” 14-3/16” 10-7/16” CATCH TRAY HOOK CATCH TRAY 7 TOOTH SPIKE 11 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 60” REEL ASSEMBLY 90” REEL ASSEMBLY Figure 2-55: 3 RSD and Flat Reel Placement 9650-38’ LH 2-78 F-605-1022...
  • Page 93 8TH HOLE 6TH HOLE 11TH HOLE 7TH HOLE 10TH HOLE 11-13/16” 12-13/16” 12-13/16” 11-13/16” 9 TOOTH SPIKE 9 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 75” REEL ASSEMBLY 75” REEL ASSEMBLY Figure 2-56: 3 RSD and Flat Reel Placement 9650-38’ CENTER 2-79...
  • Page 94 8TH HOLE 7TH HOLE 10-7/16” 14-3/16” 13-3/16” 10-7/16” CATCH TRAY CATCH TRAY HOOK 11 TOOTH SPIKE 7 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 90” REEL ASSEMBLY 60” REEL ASSEMBLY Figure 2-57: 3 RSD and Flat Reel Placement 9650-38’ RH 2-80 F-605-1022...
  • Page 95 TABLE OF CONTENTS Table provided for general use. NOTES: 2-81...
  • Page 96 6TH HOLE 9TH HOLE 19-1/16” 20-5/8” 6-7/16” 4-13/16” CATCH TRAY HOOK CATCH TRAY 10 TOOTH SPIKE 10 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 90” REEL ASSEMBLY 75” REEL ASSEMBLY Figure 2-58: 3 RSD and Flat Reel Placement 9650-42’ LH 2-82 F-605-1022...
  • Page 97 7TH HOLE 10TH HOLE 13TH HOLE 9TH HOLE 9TH HOLE 19-5/16” 5-13/16” 20-7/8” 19-5/16” 9 TOOTH SPIKE 10 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 75” REEL ASSEMBLY 90” REEL ASSEMBLY Figure 2-59: 3 RSD and Flat Reel Placement 9650-42’ CENTER 2-83...
  • Page 98 10TH HOLE 13TH HOLE 4-13/16” 6-7/16” 20-5/8” 19-1/16” CATCH TRAY CATCH TRAY HOOK 10 TOOTH SPIKE 10 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 75” REEL ASSEMBLY 90” REEL ASSEMBLY Figure 2-60: 3 RSD and Flat Reel Placement 9650-42’ RH 2-84 F-605-1022...
  • Page 99 TABLE OF CONTENTS Table provided for general use. NOTES: 2-85...
  • Page 100 12TH HOLE 17-7/16” 17-13/16” 16-3/16” 12-3/16” CATCH TRAY HOOK CATCH TRAY W/O SPRING 10 TOOTH SPIKE 13 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 90” REEL ASSEMBLY 105” REEL ASSEMBLY Figure 2-61: 3 RSD and Flat Reel Placement 9650-46’ LH 2-86 F-605-1022...
  • Page 101 8TH HOLE 6TH HOLE 11TH HOLE 7TH HOLE 10TH HOLE 11-13/16” 12-13/16” 12-13/16” 11-13/16” 9 TOOTH SPIKE 9 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 75” REEL ASSEMBLY 75” REEL ASSEMBLY Figure 2-62: 3 RSD and Flat Reel Placement 9650-46’ CENTER 2-87...
  • Page 102 11TH HOLE 12-3/16” 16-3/16” 17-13/16” 17-7/16” CATCH TRAY CATCH TRAY HOOK W/O SPRING 13 TOOTH SPIKE 10 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 105” REEL ASSEMBLY 90” REEL ASSEMBLY Figure 2-63: 3 RSD and Flat Reel Placement 9650-46’ RH 2-88 F-605-1022...
  • Page 103 TABLE OF CONTENTS Table provided for general use. NOTES: 2-89...
  • Page 104 9TH HOLE 19-1/4” 11” 12-1/2” 3-7/8” CATCH TRAY HOOK CATCH TRAY W/O SPRING 12 TOOTH SPIKE 13 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 105” REEL ASSEMBLY 105” REEL ASSEMBLY Figure 2-64: 3 RSD and Flat Reel Placement 9650-50’ LH 2-90 F-605-1022...
  • Page 105 9TH HOLE 9TH HOLE 10TH HOLE 13TH HOLE 19-3/8” 5-3/4” 20-3/4” 19-1/4” 3-7/8” 9 TOOTH SPIKE 10 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 75” REEL ASSEMBLY 90” REEL ASSEMBLY Figure 2-65: 3 RSD and Flat Reel Placement 9650-50’ CENTER 2-91...
  • Page 106 12TH HOLE 3-7/8” 12-1/2” 11” 19-1/4” CATCH TRAY CATCH TRAY HOOK W/O SPRING 13 TOOTH SPIKE 12 TOOTH SPIKE HARROW ASSEMBLY HARROW ASSEMBLY 105” REEL ASSEMBLY 105” REEL ASSEMBLY Figure 2-66: 3 RSD and Flat Reel Placement 9650-50’ RH 2-92 F-605-1022...
  • Page 107 Chapter 3 TABLE OF CONTENTS Assembly Instructions It is very important that your new 9650 Field Cultivator be WARNING properly assembled, adjusted and lubricated before use. Illustrations in this section show proper assembly Do not attempt to lift heavy parts (such as the procedures.
  • Page 108 TABLE OF CONTENTS Center Frame Assembly 5. Attach the DCV valve mount to the front of the fold cylinder mount with the rectangular hole. Use a clamp plate on the rear side of the fold cylinder mount, and IMPORTANT fasten with 3/8 x 2 bolts and lock nuts. Read all safety precautions at the front of the section 6.
  • Page 109 TABLE OF CONTENTS HOSE CLAMP HOSE CLAMP 3/8 X 2-3/4 BOLT, 3/8 X 2-3/4 BOLT, 3/8 LOCK NUT 3/8 LOCK NUT WING STABILIZER ASSEMBLY, WING STABILIZER ASSEMBLY, 5/8 X 3-11/16 5/8 X 3-11/16 SHANK SHANK X 5-1/2 U-BOLT, X 5-1/2 U-BOLT, DETAIL A DETAIL A ASSEMBLY...
  • Page 110 TABLE OF CONTENTS Center Lift Assembly 6. Raise the center lift assembly into the center frame and attach each end bearing cap to the center frame with 5/8 x 4 bolts and 5/8 lock nuts IMPORTANT 7. Install the two inner lift bearing mounts with 5/8 x 2 Read all safety precautions at the front of the section bolts and 5/8 lock nuts.
  • Page 111 TABLE OF CONTENTS DEPTH STOP ASSEMBLY, LEVELER TUBE LIFT ARM WELDMENT, WELDMENT, 5/8 X 2-1/2 BOLT, 1 X 3-1/2 BOLT, 1-1/2” FLANGE 5/8 LOCK NUT 1 LOCK NUT BEARING BEARING CAP WELDMENT, 5/8 X 4 BOLTS, 5/8 LOCK NUTS STAND HITCH PIN, 1/2 X 2-1/4 PIN, 5/8 LOCK NUTS...
  • Page 112 TABLE OF CONTENTS Hitch and Leveling Assembly 6. Slide the hose holder bracket over the 3/8 x 7 bolt and secure with another 3/4 prevailing torque flange nut. 7. Install a 3/8-16 x 3-1/2 all thread in the front of the IMPORTANT hose holder bracket and secure with a 3/8-16 hex nut.
  • Page 113 TABLE OF CONTENTS 5/8 X 3-11/16 X 5-1/2 U-BOLTS, 5/8 LOCK NUTS HITCH PIN, 5/16 X 2-1/2 SPRING PINS, MACHINE BUSHINGS LEVELER TOWER RADIUS ROD ASSMEBLY HOSE HOLDER BRACKET, 3/4 FLANGE NUTS HOSE HOLDER CLAMP, 3/8 X 3-1/2 ALL THREAD, 3/8 X 2 NUT, HITCH WING NUT...
  • Page 114 1. Attach the gauge wheel assembly to inner wing bearings, 1-1/4 washers, fold pin and 5/16 x 2-1/2 assembly with clamp plate, 3/4 x 5 bolts and 3/4 lock spring slotted pins, 9650-38’-42’ See Figure 3-4 nuts, 9650-38’-42’ See Figure 3-4 or 9650-46’-50’...
  • Page 115 FOLD PIN, 5/16 X 2-1/2 SPRING PINS, INNER WING 1-1/4 WASHERS ASSEMBLY SHANK MOUNT STAND ASSEMBLY TIRE/WHEEL ASSEMBLY, GAUGE WHEEL 9/16 LUG NUTS ASSEMBLY, CLAMP PLATE, 3/4 X 5 BOLTS, 3/4 LOCK NUTS Figure 3-4: 8’ Inner Wing Assembly 9650-38’-42’...
  • Page 116 5/16 X 2-1/2 SPRING PINS, 1-1/4 WASHERS INNER WING ASSEMBLY SHANK MOUNT STAND ASSEMBLY TIRE/WHEEL ASSEMBLY, 9/16 LUG NUTS GAUGE WHEEL ASSEMBLY, CLAMP PLATE, 3/4 X 5 BOLTS, 3/4 LOCK NUTS Figure 3-5: 10’ Inner Wing Assembly 9650-46’-50’ 3-10 F-605-1022...
  • Page 117 1. Attach the gauge wheel assembly to outer wing 1-1/4 x 7 bolt, 1-1/4 washers and 1-1/4 lock nut, assembly with clamp plate, 3/4 x 5 bolts and 3/4 lock 9650-38’-42’ See Figure 3-6 or 9650-46’-50’ nuts, 9650-38’-42’ See Figure 3-6 or 9650-46’-50’ Figure 3-7.
  • Page 118 1-1/4 X 7 BOLT, OUTER WING 1-1/4 WASHERS, ASSEMBLY 1-1/4 LOCK NUTS STAND TIRE/WHEEL ASSEMBLY, SHANK MOUNT 9/16 LUG NUTS ASSEMBLY GAUGE WHEEL ASSEMBLY, CLAMP PLATE, 3/4 X 5 BOLTS, 3/4 LOCK NUTS Figure 3-6: 6’ Outer Wing Assembly 9650-38’-42’ 3-12 F-605-1022...
  • Page 119 1-1/4 X 7 BOLT, 1-1/4 WASHERS, 1-1/4 LOCK NUTS OUTER WING SHANK MOUNT ASSEMBLY ASSEMBLY TIRE/WHEEL STAND ASSEMBLY, 9/16 LUG NUTS GAUGE WHEEL ASSEMBLY, CLAMP PLATE, 3/4 X 5 BOLTS, 3/4 LOCK NUTS Figure 3-7: 8’ Outer Wing Assembly 9650-46’-50’ 3-13...
  • Page 120 Restrictors are installed in the rod end of wing 3. Install all fittings and hoses as shown. fold cylinders to prevent uncontrolled dropping of wings. Removal of these restrictors, or Models 9650 38’-42’ See Figure 3-10 through 3-12 improper installation can result in serious hydraulic lift installation and layout.
  • Page 121 CYLINDER COUPLER DETAIL A BLUE HOSE WRAP 90° #8 ADAPTER 16 PORT MANIFOLD #8 TO #8 NOTE: LIFT HOSES ADAPTER CONNECT TO FRONT PORTS OF 16 PORT FRONT OF LIFT/FOLD MANIFOLD MACHINE ASSEMBLY Figure 3-10: Hydraulic Lift Installation 9650-38-42’ 3-15...
  • Page 122 NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS & LOOPS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS & LOOPS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS, LOOPS, HOSE MOUNTS AND HOLE OF BEARING CAP WELDMENTS Figure 3-11: Hydraulic Lift Layout 9650-38-42’ LH 3-16 F-605-1022...
  • Page 123 TABLE OF CONTENTS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS, LOOPS, HOSE MOUNTS AND HOLE OF BEARING CAP WELDMENTS Figure 3-12: Hydraulic Lift Layout 9650-38-42’ RH 3-17...
  • Page 124 COUPLER DETAIL A 90° #8 BLUE HOSE WRAP ADAPTER 16 PORT MANIFOLD #8 TO #8 NOTE: LIFT HOSES ADAPTER CONNECT TO FRONT PORTS OF 16 PORT FRONT OF LIFT/FOLD MANIFOLD MACHINE ASSEMBLY Figure 3-13: Hydraulic Lift Installation 9650-46-50’ 3-18 F-605-1022...
  • Page 125 TABLE OF CONTENTS Table provided for general use. NOTES: 3-19...
  • Page 126 NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS & LOOPS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS & LOOPS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS, LOOPS, HOSE MOUNTS AND HOLE OF BEARING CAP WELDMENTS Figure 3-14: Hydraulic Lift Layout 9650-46-50’LH 3-20 F-605-1022...
  • Page 127 TABLE OF CONTENTS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS, LOOPS, HOSE MOUNTS AND HOLE OF BEARING CAP WELDMENTS Figure 3-15: Hydraulic Lift Layout 9650-46-50’RH 3-21...
  • Page 128 #8 TO #8 MANIFOLD FOLD ADAPTER MANIFOLD #8 TEE ASSEMBLY ADAPTER DETAIL B ADAPTER NOTE: FOLD HOSES #8 TEE CONNECT TO REAR FRONT OF 90° #8 PORTS OF 16 PORT MACHINE ADAPTER MANIFOLD Figure 3-16: Hydraulic Fold Installation 9650-38’-42’ 3-22 F-605-1022...
  • Page 129 TABLE OF CONTENTS Table provided for general use. NOTES: 3-23...
  • Page 130 TABLE OF CONTENTS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS & LOOPS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS & LOOPS Figure 3-17: Hydraulic Fold Layout 9650-38’-42’ LH 3-24 F-605-1022...
  • Page 131 TABLE OF CONTENTS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS & LOOPS Figure 3-18: Hydraulic Fold Layout 9650-38’-42’ RH 3-25...
  • Page 132 #8 TO #8 MANIFOLD FOLD ADAPTER MANIFOLD #8 TEE ASSEMBLY ADAPTER DETAIL B ADAPTER NOTE: FOLD HOSES #8 TEE CONNECT TO REAR FRONT OF PORTS OF 16 PORT 90° #8 MACHINE ADAPTER MANIFOLD Figure 3-19: Hydraulic Fold Installation 9650-46’-50’ 3-26 F-605-1022...
  • Page 133 TABLE OF CONTENTS Table provided for general use. NOTES: 3-27...
  • Page 134 TABLE OF CONTENTS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS & LOOPS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS & LOOPS Figure 3-20: Hydraulic Fold Layout 9650-46-50’LH 3-28 F-605-1022...
  • Page 135 TABLE OF CONTENTS NOTE: RUN HOSES THROUGH ALL HOSE CLAMPS & LOOPS Figure 3-21: Hydraulic Fold Layout 9650-46-50’RH 3-29...
  • Page 136 TABLE OF CONTENTS 7-PIN 4-PIN CIRCUIT WIRE COLOR CONN. TOWER GROUND WHITE – WORK LAMPS BLACK LEFT FLASHING YELLOW & TURN – STOP LAMPS RIGHT FLASHING GREEN & TURN TAIL LAMPS BROWN SWITCHED – BLUE POWER (12 V) MAIN WARNING LIGHT HARNESS - WIRING CHART RIGHT RIGHT LEFT...
  • Page 137 TABLE OF CONTENTS Table provided for general use. NOTES: 3-31...
  • Page 138 1. Attach amber LH and RH light bracket assemblies to Leveling Assembly” on page 3-6.) center frame using 1/2 x 2-1/8 x 3-1/4 u-bolt and lock 10. Attach Landoll decal to back side of rear cylinder nuts See Figure 3-24...
  • Page 139 TABLE OF CONTENTS RED AG LAMP, 1/4 X 1-1/2 BOLTS & LOCK NUT TAIL LIGHT MOUNT REFLECTOR ASSEMBLY, INCLUDES MOUNT, MAIN HARNESS RED & ORANGE REFLECTOR LED AMBER LIGHT ASSEMBLY RH AG FLASHER CONTROL MODULE, 1/4 X 1-1/2 BOLTS & LOCK NUT REAR 5/8 X 3-11/16 X 6-3/8 HARNESS...
  • Page 140 TABLE OF CONTENTS NOTE: RUN LIGHT HARNESSES THROUGH ALL HOSE CLAMPS ALONG HYDRAULIC HOSES NOTE: RUN LIGHT HARNESSES THROUGH ALL NOTE: SECURE HOSE LOOPS LIGHT HARNESSES ALONG HYDRAULIC WITH TIES STRAPS HOSES TO KEEP CLEAR OF ANY MOVING PARTS NOTE: RUN LIGHT HARNESS THROUGH HOSE CLAMPS...
  • Page 141 TABLE OF CONTENTS Table provided for general use. NOTES: 3-35...
  • Page 142 TABLE OF CONTENTS Shank Installation NOTE Spring shank assemblies with frame extensions (front See Figure 2-2 through 2-5 for shank placement bar) are mounted reversed for narrower shipment. These dimensions. Verify that all shank clamps and extensions shanks must be removed and turned forward for proper are properly installed.
  • Page 143 TABLE OF CONTENTS SPRING SHANK ASSEMBLY 5/8 X 4-11/16 X 5-1/2 U-BOLT, 5/8 FLANGE LOCK NUT SPRING SHANK 1/2 X 3-1/4 BOLT, EXTENSION 1/2 LOCK NUT 5/8 X 4-11/16 X 4-3/4 U-BOLT, 5/8 FLANGE LOCK NUT 5/8 X 1-3/4 ROUND SHANK HEAD SQUARE NECK BOLT, 5/8 FLANGE...
  • Page 144 TABLE OF CONTENTS 4 Row Coil Tine Harrow Installa- 2. Assemble the coil tine assemblies to the harrow arms. 3. Front row tines are assembled with the tines above tion the stop bolts to prevent damage when shipping Figure 3-28 Detail A.
  • Page 145 TABLE OF CONTENTS ANGLE ADJUSTMENT HARROW ADJUSTMENT PIN PLATE GANG BAR MORE LESS PLATE AGGRRESIVE AGGRRESIVE 1/2 X 1-1/4 RD HEAD SQ NECK SCREW (INSTALL BOLT IN INNER BOTTOM HOLE) NOTE: REMVOVE STOP BOLTS AND ROTATE DOWN WITH STOP BOLTS ABOVE TINES 1/2 X 1-1/4 RD HEAD SQ NECK SCREW (INSTALL BOLT IN INNER TOP HOLE)
  • Page 146 TABLE OF CONTENTS 3 Row Coil Tine and Reel Harrow 3. Attach reel assemblies or flat reel assemblies to the reel arm assemblies using 5/8 x 3-11/16 x 4-5/8 Installation u-bolts and 5/8 lock nuts. 4. Attach flat bar reels with angled blades as shown See Figure 2-19 through 2-30...
  • Page 147 TABLE OF CONTENTS 3/4 X 5-1/2 BOLT, HARROW MOUNTING PLATE, 3” CLAMP BUSHING, 3/4 LOCK NUT TINE & REEL ASSEMBLY 3/4 X 5-1/2 BOLT, 3/4 LOCK NUT NOTE: REMOVE STOP BOLTS AND ROTATE DOWN WITH STOP BOLTS ABOVE TINES DETAIL A NOTE: FRONT ROW TINE SHIPPING POSTION DETAIL A...
  • Page 148 TABLE OF CONTENTS 5 Row Spike Harrow Installation NOTE See Figure 2-31 through 2-42 for 5 Row Spike Harrow See Figure 2-31 through 2-42 for 5 Row Spike Harrow placement dimensions of spike harrow arms, spike placement dimensions. bars, and usage of bar clamps or bar clamps w/ tabs. 1.
  • Page 149 TABLE OF CONTENTS NOTE: SPIKE BAR ALIGNMENT RIGHT SIDE SHOWN SPIKE HARROW ARM ASSEMBLY 3/4-10 X 9 HEX HEAD CAP SCREW CATCH TRAY 1/2-13 X 1-1/4 HEX CAP SCREW 3/4-10 X 5 HEX HEAD CAP SCREW BAR CLAMP W/TABS LYNCH PIN 1/2-13 X 3 HEX HEAD CAP SCREW PULL CHAIN BRACKET...
  • Page 150 TABLE OF CONTENTS 3 Row Spike and Reel Harrow 8. Attach flat bar reels with angled blades as shown See Figure 3-32. Installation See Figure 2-54 2-67 for 3 Row Spike and Reel Harrow See Figure 2-68 2-81 3RSD & flat reel for placement dimensions in “Standard Specification”...
  • Page 151 TABLE OF CONTENTS NOTE: SPIKE BAR ALIGNMENT RIGHT SIDE SHOWN 3 RSD ARM ASSEMBLY 3 RSD ARM W/O SPRING ASSEMBLY 3/4 X 5-1/2 BOLT, W/SPRING HARROW MOUNTING PLATE, 3” CLAMP BUSHING, 3/4 LOCK NUT 3/4 X 5-1/2 BOLT, FLAT REEL 3/4 LOCK NUT ASSEMBLY CATCH TRAY...
  • Page 152 TABLE OF CONTENTS Rear Tow Hitch (Option) 6. Attach the front of the tow hitch assembly to the cultivator frame cross tubes using u-bolts and lock nuts. See Figure 3-34 through 3-35 for rear tow hitch 7. Reinstall the rear cylinder fold mount and re-pin the installation and layout.
  • Page 153 TABLE OF CONTENTS HITCH PIN, FRONT NOTE: ROUTE HOSES 1 LOCK NUT ALONG OTHER HOSES, LEVELER TUBE TRUOUGH HOSE CLAMPS, WELDMENT ALONG CENTER FRAME, AND HITCH TO FRONT OF MACHINE TIE-STRAP 5/8 X 3-11/16 X 5-1/2 U-BOLT & 5/8 LOCK NUT REAR FOLD MOUNT ASSEMBLY, 5/8 X 3-11/16 X 5-1/2...
  • Page 154 TABLE OF CONTENTS 26” 26” NOTE: CENTER RIGHT REAR TANDEM LIGHT REAR TOW HITCH TAIL LIGHT MOUNT HARNESS ON CENTER FRAME LIGHTING MODULE MAIN WIRING HARNESS NOTE: ROUTING OF TANDEM LIGHT HARNESS REAR TOW HITCH ASSEMBLY NOTE: ROUTING OF HYDRAULIC HYDRAULIC HOSES HOSES TANDEM LIGHT...
  • Page 155 Chapter 4 TABLE OF CONTENTS Operation DANGER DANGER DANGER DANGER Never allow anyone to ride on the 9650FH Field When transporting the unit, place cylinder Cultivator at any time. Allowing a person to ride lockouts in the transport lock position after fully on the machine can inflict serious personal injury extending the cylinders.
  • Page 156 TABLE OF CONTENTS Hydraulic Lift System fully extended and held in this position, oil is able to flow through the cylinders (or rephase) and allow the The Field Cultivator is equipped with a rephasing cylinders to operate in sync. This also allows the hydraulic lift system to raise and lower the unit in the field.
  • Page 157 TABLE OF CONTENTS Table provided for general use. NOTES:...
  • Page 158 TABLE OF CONTENTS Hydraulic Fold System to fold improperly and result in serious machine damage. The Field Cultivator is equipped with a hydraulic fold 4. To fold/unfold the Field Cultivator, find a level area system to raise and lower the wing frames for narrow large enough to accommodate the machine when it is transport.
  • Page 159 TABLE OF CONTENTS NOTE: BOTH SIDES ARE EITHER FOLDED OR UNFOLDED DEPENDENT ON OPERATION DETAIL A DETAIL B WING STABILIZER DETAIL B BRACKET MOUNT WING STABILIZER BRACKET MOUNT DETAIL A TRANSPORT LOCK PIN TRANSPORT LOCK PIN STORAGE LOCATION INSTALLED TO SECURE WING WHEN UNFOLDED Figure 4-4: Wing Stabilizer Bracket Locks...
  • Page 160 TABLE OF CONTENTS Transporting 3. When towing combination, maximum equipment ground speed shall be limited to the lowest 1. Check and follow all federal, state, and local specified ground speed of any of the towed requirements before transporting the Field Cultivator. implements.
  • Page 161 The Landoll 9650 Field Cultivator is designed to be pulled transporting. Check wheel lug bolts to insure by tractor equipped with a double lip or clevis type hitch. tightness. If your tractor is not equipped as such, you need to 7.
  • Page 162 TABLE OF CONTENTS Leveling (Front-to-Rear) 2. To level the unit, verify that all tires are properly inflated. With the implement unfolded, raise the unit 1. The cultivator hitch is fully adjustable for height so the to fully extend the lift cylinders. Continue to hold the implement may be set to operate level from tractor lever 30-60 seconds to insure that the front-to-rear.
  • Page 163 TABLE OF CONTENTS Gauge Wheels Depth Stop Adjustment 1. The operating depth of the Field Cultivator is 1. The Field Cultivator is equipped with castering gauge controlled by a single-point depth stop. The stop is wheels at the outer front corners of each wing. These located at the center front of the machine gauge wheels are used to limit depth of the wings, Figure...
  • Page 164 TABLE OF CONTENTS LED Light Operation 3. When adjusting/assembling the spring assembly, tighten the upper spring bolt, but leave approximately 1. Attach the seven-pin plug to the socket at the rear of 1/8” gap above the spring jam nut See Figure 4-11.
  • Page 165 TABLE OF CONTENTS Table provided for general use. NOTES: 4-11...
  • Page 166 TABLE OF CONTENTS 4 Row Coil Tine Harrow Adjust- 2. In general tine harrows have better capabilities for handling more residue and wetter conditions. When ments operating the coil tine harrow, a more vertical tine tooth angle will make the harrow more aggressive. A 1.
  • Page 167 TABLE OF CONTENTS 1-8 HEX NUTS ANGLE ADJUSTMENT SPRING PLATE HARROW ADJUSTMENT PIN ASSEMBLY MORE LESS AGGRESSIVE AGGRESSIVE 1-1/32” 22” 1/2 X 1-1/4 RD HEAD SQ NECK SCREW (PLACE BOLT IN INNER BOTTOM HOLE) 1/2 X 1-1/4 RD HEAD SQ GANG BAR NECK SCREW (PLACE BOLT IN INNER PLATE...
  • Page 168 TABLE OF CONTENTS 3 Row Coil Tine and Reel Adjust- NOTE ments The tine teeth will hang straight down when the implement is raised, and the tines will be slightly 1. The optional 3 row coil tine and reel attachment lower than the sweeps.
  • Page 169 TABLE OF CONTENTS SPRING ASSEMBLY MORE LESS 1-8 HEX NUTS AGGRESSIVE AGGRESSIVE 1/2” 21-3/4” REEL ASSEMBLY HEAVY CLEVIS PIN LIGHT HARROW ADJUSTMENT PIN CLEVIS PIN HARROW ADJUSTMENT PIN REEL 3 ROW COIL TINE ASSEMBLY ASSEMBLY HARROW ADJUSTMENT HOLES Figure 4-14: 3 Row Coil Tine and Reel Adjustments 4-15...
  • Page 170 TABLE OF CONTENTS 5 Row Spike Harrow Adjust- 2. For the most aggressive spike to action, install the harrow adjustment pin in the forward mounting hole ments over each bar clamp for each spike bar Figure 4-15. This will position the spike teeth to be in 1.
  • Page 171 TABLE OF CONTENTS LEAST MIDDLE MOST CARRYING CHAIN TOOTH ANGLE TOOTH ANGLE TOOTH ANGLE CLEVIS PIN FORWARD PULL CHAIN SPIKE BAR ASSEMBLY BAR CLAMP W/TABS CLEVIS PIN BAR CLAMP Figure 4-15: 5 Row Spike Harrow Adjustments 4-17...
  • Page 172 TABLE OF CONTENTS 3 Row Spike and Reel Adjust- 5. The 12” diameter reel consists of nine 3/4” diameter round bars with a chevron shape for smoother ments rotation. The reels have no inner shaft to reduce plugging in wetter conditions. The reels operate 1.
  • Page 173 TABLE OF CONTENTS LEAST TOOTH ANGLE MIDDLE TOOTH ANGLE SPRING SPRING CARRYING CHAIN MOST TOOTH ANGLE ASSEMBLY ASSEMBLY 1-8 HEX NUTS 21-3/4” REEL ASSEMBLY FORWARD PULL CHAIN HARROW ADJUSTMENT PIN BAR CLAMP BAR CLAMP W/TABS FLAT REEL ASSEMBLY SPIKE BAR ASSEMBLY CLEVIS PIN REEL...
  • Page 174 TABLE OF CONTENTS Table provided for general use. NOTES: 4-20 F-605-1022...
  • Page 175 TABLE OF CONTENTS Chapter 5 Maintenance and Lubrication Wheel Bearing Maintenance – Wheel Bearing Maintenance -- Non Triple-Lip Triple-Lip Wheel bearing maintenance should be performed at the Transport tires use a self-contained seal with multiple beginning of every season of use. Check the wheel lips.
  • Page 176 TABLE OF CONTENTS Lubrication fittings before greasing. Replace any lost or broken fittings immediately. 1. A proper maintenance schedule will insure a long 3. Wheel seals, when properly installed, will allow operating life and peak performance. Performing the grease to pass without harm to seals. Regular following lubrication will ensure maximum operating lubrication will extend service life, particularly in life of the Field Cultivator...
  • Page 177 TABLE OF CONTENTS Storage 1. The service life of the Field Cultivator will be extended by proper off-season storage practices. Prior to storing the unit, complete the following procedures: a.Completely clean the unit. b.Inspect the machine for worn or defective parts. Replace as needed.
  • Page 178 TABLE OF CONTENTS Table provided for general use. NOTES: F-605-1022...
  • Page 179 Troubleshooting Guide The Troubleshooting Guide, shown below, is included to help you quickly locate problems that can happen using your 9650 Field Cultivator. Follow all safety precautions stated in the previous sections when making any adjustments to your machine. PROBLEM...
  • Page 180 TABLE OF CONTENTS PROBLEM PROBABLE CAUSE SOLUTION SWEEPS NOT CUTTING, LEAVING Shanks not positioned correctly Check for proper shank placement SKIPS Sweeps not wide enough Use wider sweeps Sweeps set too shallow Increase operating depth Incorrect sweep angle Use 47 degree sweeps Incorrect shank spring adjustment Adjust spring shank.
  • Page 181 Document Control Revision Log: Date Form # Improvement(s): Description and Comments 10/01/2010 F-605 Initial Release 12/07/2018 F-605-1218 Walking beam and Lube Table updates 02/19/2021 F-605-2021 Attachment and shank updates 10/11/2022 F-605-2022 Updated frame, hydraulic, electrical, lubrication drawings, added rear SIS 20mph emblem.
  • Page 182 Equipment from Landoll Company, LLC is built to exacting standards ensured by ISO 9001 registration at all Landoll manufacturing facilities. Model 9650 Field Cultivator Operator’s Manual Re-order Part Number F-605 LANDOLL COMPANY, LLC 1900 North Street Marysville, Kansas 66508 (785) 562-5381 800-428-5655 ~ WWW.LANDOLL.COM...