Specifying The Network Settings - Axis 7000 User Manual

16 Configuring the AXIS 70U/7000
3. Click the Admin button to display the This AXIS 70U/7000 Web page.
Enter username and password (by default set to root and pass respec-
tively).

Specifying the Network Settings

Referring to the information services table below, use the Wizard to configure
the TCP/IP and SMTP settings. Optionally, configure the External Address
Book for the automatic retrieval and loading of e-mail addresses and/or Web
(HTTP) definitions:
1. Click Network Settings.
2. Click Wizard
figuration procedures for each of the supported network protocols. This is
a convenient way to set up your AXIS 70U/7000 in your network environ-
ment.
3. Click Detailed View
for the AXIS 70U/7000 to guide you through the con-
to verify the settings.
AXIS 70U/7000 User's Guide