Axis 7000 User Manual page 12

12 Basic Installation
6. Press Select
7. Press Menu
Default router:
000.000.000.000
8. Press Select
Edit router:
000.000.000.000
9. To change the value, repeat steps 4 - 6 above.
10. Press Menu
Net mask:
000.000.000.000
11. Press Select
Edit net mask:
000.000.000.000
12. To change the value, repeat steps 4 - 6 above.
13. Press Menu
The node address should be equal the AXIS 70U/7000 serial number found
on the underside label of the unit.
14. Press Menu
Press
are finished
15. Press Select
completes the startup sequence.
16. Write the name or IP address of the AXIS 70U/7000 on the supplied
instructions label and attach it to the top cover.
The unit is ready for use when the Status indicator stops flashing and remains
lit.
Note:
If you make a mistake when editing the parameters, press the Cancel button to cancel the previous
operation.
to confirm the changes.
to display the default router address setting:
to edit the default router address:
to display the subnet mask setting:
to edit the subnet mask:
to display the node address. This address is not editable.
once more to display the final instructions:
if you
to exit the network settings. The AXIS 70U/7000 then
AXIS 70U/7000 User's Guide