Checking drive chain tension
Important
Have chain tension adjusted by a Ducati Dealer
or authorised Service Centre.
Make the rear wheel turn until you find the position
where chain is tightest. Set the motorcycle on the
side stand. With just a finger, push down the chain at
the point of measurement and release.
Measure the distance (A) between the centre of the
chain pins and the plastic section of the chain sliding
shoe. It must be: A = 22÷24 mm (0.87÷0.94 in).
Important
This only applies to the motorcycle STANDARD
settings, available upon delivery.
Important
Improper chain tension will lead to early wear of
transmission parts.
Important
To ensure the best performance and long life of
the chain, please follow the information related to
chain cleaning, lubrication, inspection and
tensioning.
230
A
Fig 189