Ducati STREETFIGHTER Owner's Manual page 142

LAP EVO
If the bike is equipped with the GPS EVO module, the
LAP EVO function is enabled. The display shows GPS
(A) symbol further to timer and lap number.
Unlike the LAP BASIC, the LAP EVO allows recording
the finish-line position and 2 splits. Once the finish-
line coordinates and splits are recorded, the LAPs are
managed by the GPS.
To set the finish-line coordinates and the splits it is
necessary to:
- position the bike on the finish-line and press the
FLASH button to record the coordinates; the
symbol (B) is displayed;
- position the bike on the first split and press the
FLASH button to record the coordinates; the
symbol (C) is displayed;
- position the bike on the second split and press
the FLASH button to record the coordinates; the
symbol (D) is displayed.
The set coordinates remain recorded also after a
key-off.
To change the coordinates of one or more positions,
repeat the recording procedure described above by
respecting the order: FINISH-LINE – SPLIT 1 –
SPLIT 2.
A
LO HI
01'35.27
1 2
Session 1 - Lap 1/30
190
RACE
km/h
C D
SETTING MENU
1245
km
TOT
0.0 km
TRIP 1
The coordinates are deleted automatically when the
instrument panel detects that the motorcycles
moves by more than 15 km away from the
memorised coordinates.
The LAP EVO allows recording maximum 30 LAPs
that can be divided into up to 4 sessions
Upon each key-on, when the LAP function is
activated, the instrument panel enables a new
session.
Once session 4 is reached, in case of key-on the
instrument panel continues the LAP recording in
session 4.
B
11:34
11 12
10
9
13
8
14
4
7
15
Gear
6
RPM X 1000
5
4
DQS OFF
3 2
1 DTC 2
DWC 8
Fig 108
A.M.
141