SETTING MENU - Lap
This function allows enabling or disabling the LAP
function and view and delete the recorded LAPs.
-
Enter the SETTING MENU.
-
Use the navigation buttons to select "Lap"
option and press ENTER button.
In this menu the function current status is displayed
on the right side and the following items on the left
side:
-
"Off" to disable the LAP function.
-
"On" to enable the LAP function.
-
"Lap Data" to view the stored laps.
-
"Erase All" to delete all memorised LAPs (visible
only if there are memorised LAPs).
Select the desired indication by pressing the
navigation buttons and press ENTER button to
activate the relevant function.
According to whether the GPS EVO is installed or
not, the "Lap Data" function shows the recorded
times in LAP BASIC or LAP EVO mode.
Any time the key is turned on, the Lap function is set
to "Off".
Back
Off
...
On
Lap Data
Off
Fig 69
111