Battery Notice; Regulatory Notices - Extreme Networks ExtremeSwitching VSP 7400 Series Hardware Installation Manual

Battery Notice

Regulatory Notices

Depending on where you are located, some or all of the following regulatory notices may apply to your
Extreme Networks product.
Fiber Optic Ports and Optical Safety
The following safety warnings apply to all optical devices used in Extreme Networks equipment that are
removable or directly installed in an I/O module or chassis system.
Such devices include but are not limited to gigabit interface converters (GBICs), small form factor
pluggable (SFP) modules (or mini-GBICs), QSFP+ modules, XENPAK transceivers, and XFP laser optic
modules.
Warning
Laser optic modules become very hot after prolonged use. Take care when removing a laser
optic module from the module or option card. If the laser optic module is too hot to touch,
disengage the laser optic module and allow it to cool before removing it completely.
When working with laser optic modules, always take the precautions listed below to avoid
exposure to hazardous radiation.
•
Never look at the transmit LED/laser through a magnifying device while the transmit LED is powered
on.
•
Never look directly at a fiber port on the switch or at the ends of a fiber cable when they are
powered on.
•
Invisible laser radiation can occur when the connectors are open. Avoid direct eye exposure to the
beam when optical connections are unplugged.
•
Never alter, modify, or change an optical device in any way other than suggested in this document.
VSP 7400 Series Switches: Hardware Installation Guide
Warning: This product contains a battery used to maintain product
information. If the battery should need replacement it must be replaced by
Service Personnel. Please contact Technical Support for assistance.
Risk of explosion if battery is replaced by an incorrect type. Dispose of
expended battery in accordance with local disposal regulations.
Attention: Ce produit renferme une pile servant à conserver les
renseignements sur le produit. Le cas échéant, faites remplacer la pile par le
personnel du service de réparation. Veuillez communiquer avec l'assistance
technique pour du soutien.
Il y a risque d'explosion si la pile est remplacée par un type de pile incorrect.
Éliminez les piles usées en conformité aux règlements locaux d'élimination
des piles.
Safety and Regulatory Information
80