Extreme Networks ExtremeSwitching VSP 7400 Series Hardware Installation Manual page 11

Note
When Fabric Connect is enabled, physical ports 31 and 32 are reserved for internal use.
Refer to Administering VSP Operating System Software for details.
•
RJ45 serial console port used to connect a terminal and perform local management.
•
USB port for access to external storage.
•
RJ45 out-of-band 10/100/1000BASE-T management Ethernet port.
•
LEDs to indicate port status and switch operating conditions. For a description of the LEDs and their
operation, see VSP 7400 Series Switch LEDs
Figure 1: VSP 7432CQ Switch - Front Panel
1 = QSFP28/QSFP+ Ethernet ports
2 = Console port: RJ45
The rear panel of the VSP 7400 switch includes:
•
Two power supply bays for 750 W AC or DC power supplies.
•
Six bays for replaceable fan modules.
Note
The color of the tab on the fan tray indicates the airflow direction:
•
Red: front-to-back
•
Blue: back-to-front
The operating-system software cannot display the airflow direction.
Figure 2: VSP 7432CQ Switch - Rear Panel
1 = Grounding point
VSP 7400 Series Switches: Hardware Installation Guide
Overview of the VSP 7400 Switches
on page 61.
3 = USB port
4 = Management port: RJ45
3 = Fan modules
11