Table of Contents
Advertisement
5 Attach the two cable clamp to the pole bracket. Open the cable clamp by turning a flat bladed
screwdriver counterclockwise. Then, insert the non-clamp end into the pole bracket through the
holes.
Note
It is easier to install both clamps before attaching to the pole.
Figure 6: Pole Mount Orientation
6 Put the metal band around the pole and insert it into the clamp.
7 Turn the clamp screw clockwise, tightening the band around the pole.
ExtremeWireless™ AP3965i & AP3965e Installation Guide
Installation
17
Advertisement
Table of Contents
Related Manuals for Extreme Networks ExtremeWireless AP3965i
Related Products for Extreme Networks ExtremeWireless AP3965i
- Extreme Networks ExtremeWireless AP3935i
- Extreme Networks ExtremeWireless AP3935e
- Extreme Networks AP305C
- Extreme Networks AP305CX
- Extreme Networks ExtremeWireless AP310i
- Extreme Networks ExtremeWireless AP310e
- Extreme Networks ExtremeWireless AP360i ExtremeWireless AP360e
- Extreme Networks ExtremeWireless AP360e
- Extreme Networks ExtremeWireless AP360i-FCC
- Extreme Networks ExtremeWireless AP360i-CAN
- Extreme Networks ExtremeWireless AP360i-WR
- Extreme Networks ExtremeWireless AP360e-FCC
- Extreme Networks ExtremeWireless AP360e-CAN
- Extreme Networks ExtremeWireless AP360e-WR
- Extreme Networks ExtremeWireless AP302W
- Extreme Networks AP3000