Extreme Networks ExtremeWireless AP3965i Installation Manual page 10

Table 3: AP3965 LED Status Indicators
LED
1 (AP status)
2 (Ethernet link state) LAN 1
3 (Ethernet link state) LAN 2
4 (Radio 2 status)
5 (Radio 1 status)
Antennas
The AP3965i includes eight internal antennas and the AP3965e supports the attachment of up to eight
external antennas. The AP3965e can transmit from multiple antennas at the same time, as defined with
MIMO operation, but the antennas must be selected manually based on customer requirements and
coverage area. For a list of approved external antennas, refer to
External Antenna Connectors
The AP3965e supports eight external antenna connections for both 2.4GHz and 5GHz radios. These
antennas offer a variety of options for extending the radio range and shaping the coverage area. For a
list of approved external antennas, refer to
LAN Ports
The AP3965 has two 10/100/1000BaseT RJ45 LAN ports (see
that can be attached directly to a 10/100/1000BaseT LAN segment. This segment must conform to the
IEEE 802.3 or 802.3u specifications.
The AP3965 appears as an Ethernet node and performs a bridging function by moving packets from
the wired LAN to remote workstations on the wireless infrastructure.
ExtremeWireless™ AP3965i & AP3965e Installation Guide
Indicator Status
On Green
Flashing Green
On Amber
On Green
On Amber
Off
On Green
On Amber
Off
On Green
Off
On Green
Off
External Antennas
Description
AP3965 working normally
AP3965 running a self test or
loading a software program
CPU/system failure
Valid 100Mbps Ethernet link
Valid 1Gbps Ethernet link
Link down
Valid 100Mbps Ethernet link
Valid 1Gbps Ethernet link
Link down
Radio 2 enabled
Radio 2 not on
Radio 1 enabled
Radio 1 not on
External Antennas on page 34.
on page 34.
Figure 1: AP3965e Front View
Introduction
on page 9)
10