Extreme Networks ExtremeWireless AP3965i Installation Manual page 15

4 If using #10 screws, tighten them to a torque of 25 in-lbs. If using ¼" screws, tighten them to 45 in-
lbs.
Figure 4: Mounting the AP3965 to a Wall
Note
Use anchors when mounting on cement walls. Mounting screws (shown above) are not
included.
Mounting the AP3965 to a Pole
To fit the mounting plate to a pole:
1 Determine the diameter of the pole.
Pole Diameter
<= 2.5" [63.5mm]
6" - 7" (178mm)
Note
For other pole diameters, provide your own stainless steel cable clamp. The band must be
½" (12.7mm) wide.
ExtremeWireless™ AP3965i & AP3965e Installation Guide
Cable Clamp Size
Use small cable clamp
Use large cable clamp
Installation
15