Table of Contents
Advertisement
Mini-GBIC Input/Output Specifications
Table A-13 Industrial Mini-GBIC Input/Output Port Specifications (continued)
Item
I-MGBIC-GLX
I-MGBIC-GZX
I-MGBIC-GTX
Specifications
Please refer to the datasheet at the following link for the specifications for the Mini-GBICs listed in
Table
A-13. These Mini-GBICs meet or exceed the IEEE 802.3z-1998 standard.
http://www.enterasys.com/products/transceivers-ds.pdf
Non-Industrial-Use Mini-GBICs
The following Mini-GBICs should not be used in industrial or hazardous environments, or in
environments where temperatures may reach down to -40
for a list of industrial-use Mini-GBICs.
Table A-14 Non-Industrial Mini-GBIC Input/Output Port Specifications
Item
MGBIC-LC01
MGBIC-LC03
MGBIC-LC09
MGBIC-08
MGBIC-02
A-6 Specifications and Regulatory Compliance
Specification
Provides one LC fiber-optic single-mode port that is compliant with the
1000BASE-LX standard and has an LC connector. Requires SFP retention
bracket (850A0102-04-N) which is mounted on the I-Series chassis at
shipment.
Provides one LC fiber-optic single-mode port that is compliant with the
1000BASE-ELX standard and has an LC connector. Requires SFP retention
bracket (850A0102-04-N) shipped with the I-Series chassis. which is
mounted on the I-Series chassis at shipment.
Provides one RJ45 copper connection that is compliant with the 1000BASE-T
standard and has an RJ45 connector. Requires copper retention bracket
(850A0109-02-N), included in the MGIB package and shipped with the I-
Series chassis.
Note: If the I-Series switch will be installed in a Class 1, Division 2 hazardous environment, you
must install the retention bracket over each port in which an industrial grade Mini-GBIC is installed
as listed in
Table
A-13.
These retention brackets are not required for use in non-hazardous environments and will not fit
over standard Mini-GBICs such as those listed in
Specification
Provides one LC fiber-optic multimode port that is compliant with the
1000BASE-SX standard LC connector.
Provides one LC fiber-optic multimode port that is compliant with the
1000BASE-SX standard LC duplex style connector.
Provides one LC fiber-optic single-mode port that is compliant with the
1000BASE-LX standard LC connector.
Provides one LC fiber-optic single-mode port that is compliant with the
1000BASE-ELX standard LC connector.
Provides one RJ45 copper connection that is compliant with the 1000BASE-T
standard RJ45 connector.
Table
A-14.
o
o
C or up to +60
C. Refer to
Table A-13
Advertisement
Chapters
Table of Contents
