Access To Command Panel And Light Bar - Electrolux PWE9038-M Service Manual

Accessibility to command panel and light bar
To remove the command panel, first unplug the
main board cable. Then, we must free the
command panel from its supports.
To do it, just remove the screws (2 + 2) from the command
panel supports. Please make attention, the command panel
could fall if not held properly
To remove the light bar, first unplug the connectors on
both sides .
Remove the light bar support bolts. At this
point it's possible to remove the light bar and
the light bar support pulling the support.
1.1.0 5.2007 36/40 Refreshment Center