Access to the cooling unit
To remove the cooling unit from this appliance, be sure you have opened the top of the water
tank. Then, please do as follows:
First, free the ice evaporator from the side
supports; remove the two screws.
Second, cut or remove the wrappers that
hold the stainless steel tubes together
To free the compressor and condenser
support from the base, we must remove all
4 screws that fix the support to the base.
Two screws should be removed from the
bottom side and two ones from the upper
side of the base.
When the fridge part is free, to take it off
we must just pull upwards carefully,
making attention to not pulling up also the
ice tray filler stainless steel tube.