Taws Alarm; Airspace Ahead Alarm; Event Log - AvMap EKP-IV PRO User Manual

this circle an alarm sounds and the Waypoint Alarm box apprears on the screen.
Note
The alarm is only active for User Waypoints with this symbol selected for the icon: "alarm logo".
To set the alarm:
> 'MENU' 1 sec + 'MENU' + "ALARM SETUP" + 'ENTER' + "AIRSPACE AHEAD ALARM"
+ 'ENTER'
After pressing 'ENTER' a box will appear with 00.00. Using the cursor key, select the number
desired and press 'ENTER'. The default setting is OFF (00.00). After pressing 'ENTER' a window is
displayed. In this files the 00.00. default value is set. Choose a parameter moving the arrows keys
and press 'ENTER' to confirm.

14.3.4 tAWS Alarm

Enables the TAWS alarm.
Note
Vertical "ALRM" string appears at the right down edge of the TAWS Legend BOX when the TAWS Alarm is
enabled.

14.3.5 Airspace Ahead Alarm

If your projected track will cross an airspace sector, an alarm will sound and a warning box will
appear on the screen. If there is an altitude limitation to the airspace, we will display an alarm if
your current altitude is within 500 feet of the limitations. To set the time interval for the alarm:
> 'MENU' 1 sec + "ALARM SERUP: + 'ENTER' "AIRSPACE AHEAD ALARM" + 'ENTER'
After pressing 'ENTER' a box will appear with 00.00. Using the cursor key, select the number
desired and press 'ENTER'.
The default setting is OFF (00.00). In addition, you can select the category of airspace associated
with the alarm. To select the categories:
> 'MENU' 1 sec 'MENU; + "ALARM SETUP"
Use the cursor key to select each category of airspace and turn ON/OFF the alarm for that category.
The time interval set above is for all airspace selected as ON.
CLASS B, CtA
CLASS C, tMA
toWERS, CoNtRoL zoNES on/off
REStRICtED AREAS
MoA AND othER SUA

14.3.6 Event Log

The Event Log page contains information on Event as Power On, Power Off, GPS Fix Lost, and so
on. For each Event, the Event name, Time and Date are shown.
To Select the Event LOG page:
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "ALARM SETUP" + 'ENTER' +
7
on/off
on/off
on/off
on/off