Clear Event Log; Track Set-Up; Track Display; Track Line - AvMap EKP-IV PRO User Manual

"EVENT LOG..." + 'ENTER'

14.3.7 Clear Event Log

Clears the Event Log memory and starts new:
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "ALARM SETUP" + 'ENTER' +
"CLEAR EVENT LOG" + 'ENTER'
After pressing 'ENTER' a window appears: press 'ENTER' to confirm deletion (or 'CLEAR' to abort
function). The message "DONE" will appear confirming the action.

14.4 tRACK SEt-UP

Track is the actual course traveled, which the EKP-IV can display as a series of connected dots. The
interval setting can be defined by the pilot.
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "TRACK SETUP" + 'ENTER'

14.4.1 track Display

Track display On will display track history on the Moving Map. All track data stored in the unit
memory will be displayed. The default setting is Off.
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "TRACK SETUP" + 'ENTER' +
"TRACK DISPLAY" + 'ENTER'

14.4.2 track Line

Defines how the line which represents the track is displayed : Solid or Dashed.

14.4.3 track Width

Defines the width of the line which represents the track .

14.4.4 track Color

Defines the color of the line which represents the track .

14.4.5 track Recording Step

The EKP-IV stores many thousand of points data points to display a pattern of aircraft movement
(Track). After many thousand of points intervals the oldest is deleted with each new position fix
point. The following options assist in getting the most track memory for your type of flying.
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "TRACK SETUP" + 'ENTER' +
"TRACK RECORDING STEP" + 'ENTER'
Distance - will store a fix point at the specified interval of distance.
time - will store a fix point at the specified interval of: 5 sec, 30 sec, 1 min.
Auto - this allows for the most efficient use of the memory as the software will determine when to
store a fix point based on straight and curved flight paths.
The default setting is Auto.

14.4.6 Clear track

Deletes all of the Track history and begins new.
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "TRACK SETUP" + 'ENTER' +
"CLEAR TRACK" + 'ENTER'
73