Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for AvMap EKPV
Summary of Contents for AvMap EKPV
- Page 1 Aeronautical Navigator COCKPIT DOCKING STATION INSTALLATION GUIDE Standard and OEM Versions Your Journey, Our Technology...
-
Page 3: Disclaimer & Warnings
Aeronautical Products EKP V Docking Station DISCLAIMER & WARNINGS This product is not TSO-certified and have received no EASA or FAA approval. This product is not intended for installation in type-certificated aircraft. Avoid installing the product near heat sources or ensure adequate cooling is provided. -
Page 4: General Description
Aeronautical Products EKP V Docking Station General Description The EKP V Cockpit Docking Station (CDS) allows the installation of AvMap EKP V Aeronautical Navigator into the cockpit, and enables the unit to interface to multiple external devices at the same time. -
Page 5: Dimensions And Specifications
• Temperature range -20, + 70 °C. Front Side Male Pogo Pin connector, to be coupled with the female connector on the back side of the EKPV. Fuse: Socket for the 3A fuse. Safety switch to disable the power supply to the connector (A) when the device is not docked. - Page 6 Aeronautical Products EKP V Docking Station Back Side Battery powered USB Port: backup power provided by the EKP V internal battery. Normal USB Ports: powered by the aircraft electrical system. DB 15 direct soldering connector (OEM version only). Wire clamp connector (Standard version only). Cable locking bar.
-
Page 7: Wiring And Connections
Wiring and connections USB Ports The CDS includes four USB ports to connect AvMap's or approved third-party modules to the EKP V. One of the ports (D) is powered by the EKP V internal battery to ensure functionality even in case of aircraft electrical power failure. - Page 8 Aeronautical Products EKP V Docking Station OEM Version DB-15 Connections DB-15 electrical pin-out DB-15 Connections External Power Supply Input (10-35Vdc) GND - EXT EXT+ Video Input VID-IN AUDIO-VIDEO GND Audio Input AUDIO VIDEO GND AUDIO IN Pin # Signal Audio Output GND - EXT AUDIO OUT AUDIO VIDEO GND...
- Page 9 Aeronautical Products EKP V Docking Station CDS Installation Cut the cockpit using the cutting template provided in the box. Connect and secure the included DB-15 interface (direct soldering or clamp board, depending on the CDS version) on the back of the CDS. Connect required wires...
- Page 10 Aeronautical Products EKP V Docking Station Docking the EKP V NOTE: when the EKP V is not docked the CDS can be protected by installing its plastic protective cover. - Installation Guide...
- Page 12 MMDSXAM0AE031 www.avmap.us ÑMMDSXAM0AE031vÓ...
Need help?
Do you have a question about the EKPV and is the answer not in the manual?
Questions and answers