Engine Start - AvMap EKP-IV PRO User Manual

Avmap ekp-iv pro: user manual
Hide thumbs Also See for EKP-IV PRO:
Table of Contents

Advertisement

11 thE ChECKLIStS
The EKP-IV provides a checklist of standard procedures for Engine Start, Ground Check, Pre-Take-
off, Cruise in Flight and Landing. The Checklists can be customized by inserting and/or deleting
aircraft procedures. Hit MENU + MENU + CHECKLISTS + ENTER + ENGINE START (or any
other Checklist field) + ENTER. Press "Zoom In" to INSERT a Checklist Item. Using the Toggle Key,
move up or down to select the letter desired. Scroll to the right and continue until the words or
abbreviations are completed. Hit ENTER to save. Use the "Zoom Out" key to append a checklist
item. Up to 16 Checklist Items can be created in the Vertical Mode.
Note
Your aircraft may have additional items that require checking for each procedure. Consult your aircraft manual for
a complete list.
'MENU' 1 sec. + "CHECKLISTS" + 'ENTER'

11.1 ENGINE StARt

>'MENU' 1 sec. + "CHECKLISTS" + 'ENTER' + "ENGINE START" + 'ENTER'
After pressing 'ENTER' select each item (Doors/Belts, Parking Brake, CKT BRK, Carb. Heat, Throttle,
Mixture, Master Switch, Fuel Pump, Start Engine, RPM/Gauges).
Press 'ENTER' to mark each item after checking is completed. If all the items of the list are not
checked upon exit a warning message appears on the screen that states the check-list has not been
6
Fig. 11 - Checklists page

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EKP-IV PRO and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents