Poi Settings - AvMap EKP-IV PRO User Manual

Avmap ekp-iv pro: user manual

Hide thumbs Also See for EKP-IV PRO:

Table of Contents

Scroll through the cells using the cursor key. To select the desired scale you would like the map

to begin displaying data for the category, place the cursor within the cell and press 'ENTER'. (The

map scale for the cell is displayed at the top right.) Any box with an "X" indicates the feature is not

available at that chart scale.

All data for that category will begin to display at that chart scale checked and all scales below. It

is also possible tochoose the catrografic information to be shown based on the selected "Cycle"

program.

There are 3 programs available thatthe user can personalize through the 1//3 Cycle columns. For

each of them it is possible to activate/deactivate any cartographic object. To change the program

from the map pages it is necessary to press 'CYCLE'.

3.5.13 PoI Settings

This feature is similar to the Selective Display, but refers to the Points of Interest (POI).

'MENU' + " POI SETTINGS..." + 'ENTER'

Fig. 3.5.13- POI Settings

Table of Contents

Do you have a question about the EKP-IV PRO and is the answer not in the manual?