Table of Contents
Advertisement
14.1.2 Scale Format
Selects the desired setting for display of the map scale in the Data Window field.
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "GENERAL SETUP" + 'ENTER' +
"SCALE FORMAT" + 'ENTER'
The selection options are:
BAR - the width of the screen is equal to the bar length times the number displayed.
LEVEL - a letter associated with C-MAP's chart cell level is displayed.
WIDth - the width of the screen is displayed.
Use the cursor key to select and 'ENTER' to accept. The default setting is Bar.
14.1.3 Language
Selects the language in which you wish menu information to be displayed (i.e. screen labels, menus
and options). Map detail will remain in English.
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "GENERAL SETUP" 'ENTER' +
"LANGUAGE" + 'ENTER'
Use the cursor key to select and 'ENTER' to accept. The default setting is English.
14.1.4 Military Frequency
The display of Military Frequency data can be set to ON or OFF (this data is found in European
Database cards).
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "GENERAL SETUP" + 'ENTER' +
"MILITARY FREQUENCY" + 'ENTER'
Use the cursor key to select and 'ENTER' to accept. The default setting is Off.
14.1.5 Airspaces Level
Sets the Altitude value that conditions the air spaces display if MOVING MAP
MENU -> AIRSPACE SETTINGS -> DISPLAY AIRSPACES is set ABOVE or BELOW.
If DISPLAY AIRSPACES is set ALL , AIRSPACE LEVEL is irrelevant.
14.1.6 terrain Legend
Enables/Disables the legend box in the lower left corner of the display when in the MOVING MAP
MENU any of the TAWS features is selected.
14.1.7 Power Save
Selects one of the three modes of power save when the batteries are used: Off, Minimum or
Maximum
> 'MENU' 1 sec. + "SYSTEM SETUP" + 'ENTER' + "GENERAL SETUP" + 'ENTER' +
"POWER SAVE" + 'ENTER'
Use the cursor key to select and 'ENTER' to accept. The default setting is MIN.
69
Advertisement
Table of Contents
